ECU-database ›
BMW › BMW 3 SERIES E90/E91/E92/E93 320d 2.0L L4 16V 120kW/161HP EDC17CP02
Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 21 firmwareversies
Voertuiggegevens
| Merk | BMW |
| Model | 3 SERIES E90/E91/E92/E93 |
| Motor | 320d 2.0L L4 16V 120kW/161HP EDC17CP02 |
| Standaard vermogen | 163 CV / 12 kW |
| Cilinderinhoud | 2000 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | Auto |
ECU
| Fabrikant | BOSCH |
| Model | EDC17CP02 |
| Geheugen / EPROM | TRICORE con DFLASH & PFLASH - 180000 |
Beschikbare tuning-opties:
- Maximum engine boost pressure F (atmospheric pressure)
- Maximum engine boost pressure F (atmospheric pressure) 2
- Boost pressure
- Boost pressure 2
- Maximum torque limitation at clutch
- EGR valve control
- EGR valve control 2
- Max accepted exhaust gas temperature value at particulate sensor
- Protection for engine overheating
- Protection for engine overheating 2
- Protection for engine overheating 3
- Injection period at full throttle
- Basic torque management at engine cranking
- Gearbox maximum torque allowed
- Injection period
- Maximum injection period
- Maximum injection period 2
- Injection opening time related to inj. pressure
- J
- L
- Torque limiter 3
- Torque limiter 4
- Torque limiter 5
- Torque limiter 6
- Torque limiter 7
- Torque limiter
- Torque limiter for diagnostic
- Torque limiter during particulate filter overloading - pressure
- Torque limiter during particulate filter overloading - temperature
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 2
- Minimum LSU sensor temperature limit - heater control
- Maximum LSU sensor temperature limit - heater control
- LSU temperature threshold PID heater governor activation
- Speed limiter
- Max torque profile
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure limiter 3
- Relative permissible torque from the pedal position in torque limitation
- Specific injection pressure
- Driver torque request
- Torque limiter for selected gear
- Torque limiter for EFT sensor
- Turbocharger volumetric efficiency
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
- Variable geometry duty cycle limit 3
Firmware-identificatoren (21)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| — | 08508711 |
1.00.031 | 08508779 |
BOSCH EDC17CP02 |
| — | 08506374 |
1.00.021 | 08507097 |
BOSCH EDC17CP02 |
| — | 07811700 |
1.00.019 | 07811691 |
BOSCH EDC17CP02 |
| — | 07809000 |
1.00.023 | 07809260 |
BOSCH EDC17CP02 |
| — | 07812500 |
1.00.021 | 07812696 |
BOSCH EDC17CP02 |
| — | 08506374 |
1.00.031 | 08507071 |
BOSCH EDC17CP02 |
| — | 08506374 |
1.00.026 | 08507016 |
BOSCH EDC17CP02 |
| — | 08506374 |
1.00.027 | 08507025 |
BOSCH EDC17CP02 |
| — | 08506199 |
1.00.014 | 08506233 |
BOSCH EDC17CP02 |
| — | 07809999 |
1.00.006 | 07811869 |
BOSCH EDC17CP02 |
| — | 07810000 |
1.00.020 | 07810029 |
BOSCH EDC17CP02 |
| — | 08512498 |
1.00.006 | 08516808 |
BOSCH EDC17CP02 |
| — | 08506199 |
1.00.008 | 08506235 |
BOSCH EDC17CP02 |
| — | 08506199 |
1.00.021 | 08506232 |
BOSCH EDC17CP02 |
| — | 07809000 |
1.00.030 | 07809265 |
BOSCH EDC17CP02 |
| — | 08506199 |
1.00.018 | 08506240 |
BOSCH EDC17CP02 |
| — | 07811700 |
1.00.018 | 07811693 |
BOSCH EDC17CP02 |
| — | 08506199 |
1.00.021 | 08506843 |
BOSCH EDC17CP02 |
| — | 08512587 |
1.00.018 | 08512756 |
BOSCH EDC17CP02 |
| — | 07811700 |
1.00.018 | 07811714 |
BOSCH EDC17CP02 |
| — | 08510591 |
1.00.020 | 08506160 |
BOSCH EDC17CP02 |
Technische voertuignotities
OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.
ECU-notities
MICRO Infineon Tricore TC1766 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1766 This Setting File can be used for serial system NewGenius. WARNING: it is possible to use the serial protocol only if the New Genius is equipped with the F32GN067 dongle. This software is equipped with a serial ANTITUNING system. For writing with the New Genius it is necessary to use the original certified file of the setting file. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1766 This Setting File can be used for serial system NewGenius. WARNING: it is possible to use the serial protocol only if the New Genius is equipped with the F32GN067 dongle. To work on this ECU you can use NewTrasdata
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
