BMW 3 SERIES E46 320i 2.0L L6 24V 110kW/148HP MS42

ECU CONTINENTAL-SIEMENS-VDO MS42 · 150 CV (11 kW) · 2000 cc · Benzina aspirato

ECU-databaseBMW › BMW 3 SERIES E46 320i 2.0L L6 24V 110kW/148HP MS42

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 13 firmwareversies

Voertuiggegevens

MerkBMW
Model3 SERIES E46
Motor320i 2.0L L6 24V 110kW/148HP MS42
Standaard vermogen150 CV / 11 kW
Cilinderinhoud2000 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantCONTINENTAL-SIEMENS-VDO
ModelMS42
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Injection at part load O2 sensor 1
  • Injection at part load O2 sensor 2
  • Advance at part load O2 sensor 1
  • Advance at part load O2 sensor 2
  • Advance correction
  • Load / throttle position reference
  • Engine idle
  • Injection correction
  • Knock detection factor
  • Injection at idle O2 sensor 1
  • Injection at idle O2 sensor 2
  • Specific air mass charge 2
  • Air mass flow

Firmware-identificatoren (13)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1430268C800 1.04.015 CONTINENTAL-SIEMENS-VDO MS42
1430273D402 1.04.010 CONTINENTAL-SIEMENS-VDO MS42
14307851D403 1.04.011 CONTINENTAL-SIEMENS-VDO MS42
1430844D601 1.04.006 CONTINENTAL-SIEMENS-VDO MS42
1430844D601 1.04.011 CONTINENTAL-SIEMENS-VDO MS42
7500255E300 1.04.004 CONTINENTAL-SIEMENS-VDO MS42
7500255E300 1.04.015 CONTINENTAL-SIEMENS-VDO MS42
7500255E300 1.04.021 CONTINENTAL-SIEMENS-VDO MS42
7500255E300 1.04.011 CONTINENTAL-SIEMENS-VDO MS42
7500255E300 1.04.016 CONTINENTAL-SIEMENS-VDO MS42
7500255E300 1.04.007 CONTINENTAL-SIEMENS-VDO MS42
7500255E300 1.04.003 CONTINENTAL-SIEMENS-VDO MS42
7526753E600 1.04.013 CONTINENTAL-SIEMENS-VDO MS42

Technische voertuignotities

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system NewGenius.