BMW MOTORRAD F 900 R 21->24 77kW

ECU BOSCH ME17.2.42 BMS-O · 105 CV (77 kW) · 900 cc · Benzina aspirato

ECU-databaseBMW MOTORRAD › BMW MOTORRAD F 900 R 21->24 77kW

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 20 firmwareversies

Voertuiggegevens

MerkBMW MOTORRAD
ModelF 900 R
Motor21->24 77kW
Standaard vermogen105 CV / 77 kW
Cilinderinhoud900 cc
BrandstofBenzina aspirato
VoertuigtypeMoto

ECU

FabrikantBOSCH
ModelME17.2.42 BMS-O
Geheugen / EPROMMICRO ST TRICORE - 32768 - 400000

Beschikbare tuning-opties:

  • AB2C
  • Best timing - cam switch position 0
  • Best timing - cam switch position 1
  • Air mass quantity correction
  • Lambda/AFR full load/WOT
  • Lambda/AFR full load/WOT for components protection
  • Lambda/AFR mixture for engine temperature at crancking
  • Spark advance clutch/neutral - warm up - cam switch position 0
  • Spark advance clutch/neutral - warm up - cam switch position 1
  • AO2C
  • Optimal spark timing/MBT - cam switch position 0
  • Optimal spark timing/MBT correction
  • Optimal spark timing/MBT for minimum TPS - cam switch position 0
  • AOMTC
  • Advance at part load 2 - cam switch position 0
  • AP2C
  • Advance at part load - cam switch position 0
  • APC
  • APRC
  • Automatic stability control 1
  • Automatic stability control
  • Automatic stability control 3
  • Automatic stability control 4
  • Automatic stability control 5
  • Automatic stability control 6
  • Automatic stability control - lean angle - 1
  • ASCLA
  • Automatic stability control - lean angle - 4
  • Automatic stability control - lean angle - 5
  • Automatic stability control - lean angle - 6
  • Advance correction - overheating protection
  • Advance correction for IAT sensor
  • Advance full load - cam switch position 0
  • Advance full load - cam switch position 1
  • Dynamic traction control 1
  • Dynamic traction control 2
  • Dynamic traction control 3
  • Dynamic traction control
  • Dynamic traction control 5
  • Dynamic traction control 6
  • Base injection factor - cam switch position 0
  • Base injection factor - cam switch position 1
  • Factor to correct fuel delivery system - cylinder 1 - cam switch position 0
  • Factor to correct fuel delivery system - cylinder 1 - cam switch position 1
  • Factor to correct fuel delivery system - cylinder 2 - cam switch position 0
  • Factor to correct fuel delivery system - cylinder 2 - cam switch position 1
  • Engine idle vs. ECT sensor
  • Engine idle vs. ECT sensor 2
  • Engine idle vs. ECT sensor - warm up - cam switch position 0
  • Engine idle vs. ECT sensor - warm up - cam switch position 1
  • Rpm threshold fuel cut
  • Torque limiter 2
  • Torque limiter 3
  • Advance limiter for component protection - cam switch position 0
  • Advance limiter for component protection - cam switch position 1
  • Advance limiter for minimum fuel 2 - cam switch position 0
  • Advance limiter for minimum fuel 2 - cam switch position 1
  • Advance limiter for minimum fuel - cam switch position 0
  • Advance limiter for minimum fuel - cam switch position 1
  • Advance limiter lower motor temperature threshold - cam switch position 1
  • Advance limiter lower motor temperature threshold - cam switch position 0
  • Advance limiter upper motor temperature threshold - cam switch position 1
  • Advance limiter upper motor temperature threshold - cam switch position 0
  • Advance limiter for optimum fuel 2 - cam switch position 0
  • Advance limiter for optimum fuel 2 - cam switch position 1
  • Advance limiter for optimum fuel - cam switch position 0
  • Advance limiter for optimum fuel - cam switch position 1
  • Torque limiter
  • Lambda enrichment for components protection
  • Lambda efficiency
  • Lambda efficiency 2
  • RPM Limiter
  • RPM limiter - N
  • Lambda driver wish
  • Lambda driver wish CAT heating
  • Lambda driver wish over throttle - cam switch position 0
  • Lambda driver wish over throttle - cam switch position 1
  • Maximum torque correction for BPS/APS sensor
  • Optimal engine moment - cam switch position 0
  • Optimal engine moment - cam switch position 1
  • Optimal engine moment for minimum TPS - cam switch position 0
  • Optimal engine moment for minimum TPS - cam switch position 1
  • Air mass flow - cam switch position 0
  • Air mass flow - cam switch position 1
  • Exhaust gas temperature sensor - cam switch position 0
  • Exhaust gas temperature sensor - cam switch position 1
  • Throttle angle limitation
  • Throttle angle management
  • Throttle angle management - cam switch position 0
  • Throttle angle management - cam switch position 1
  • Cooling fan activation
  • Front tire circumference
  • Rear tire circumference
  • Throttle position target

Firmware-identificatoren (20)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
0000616E0200000000619314000A 1.95.0120000618E14000A BOSCH ME17.2.42 BMS-O
0000616E020000000061931B0000 1.95.013000061941B0000 BOSCH ME17.2.42 BMS-O
0000616E020000000061931A0000 1.95.0070000618E1A0002 BOSCH ME17.2.42 BMS-O
0000616E02000000006193190000 1.95.00600006194190001 BOSCH ME17.2.42 BMS-O
0000616E02000000006193130014 1.95.00700006192130014 BOSCH ME17.2.42 BMS-O
0000616E02000000006193150000 1.95.00700006192150001 BOSCH ME17.2.42 BMS-O
0000616E0200000000619314000A 1.95.0090000619214000A BOSCH ME17.2.42 BMS-O
0000616E03000000006193200000 1.95.0030000618F200005 BOSCH ME17.2.42 BMS-O
0000616E03000000006193200000 1.95.00500006192200002 BOSCH ME17.2.42 BMS-O
0000616E03000000006193200000 1.95.0040000618F200001 BOSCH ME17.2.42 BMS-O
0000616E03000000006193200000 1.95.012000073B6200004 BOSCH ME17.2.42 BMS-O
0000616E03000000006193200000 1.95.0040000618F200004 BOSCH ME17.2.42 BMS-O
0000616E03000000006193200000 1.95.00300006195200004 BOSCH ME17.2.42 BMS-O
0000616E03000000009E4C940000 1.95.00300009E6A940000 BOSCH ME17.2.42 BMS-O
0000616E030000000061931E0000 1.95.004000061921E0000 BOSCH ME17.2.42 BMS-O
0000616E03000000006193200000 1.95.00500006192200001 BOSCH ME17.2.42 BMS-O
0000616E03000000006193200000 1.95.0110000618E200002 BOSCH ME17.2.42 BMS-O
0000616E03000000006193200000 1.95.01200006192200004 BOSCH ME17.2.42 BMS-O
0000616E03000000009E4C940000 1.95.00300009E70940000 BOSCH ME17.2.42 BMS-O
0000616E03000000006193200000 1.95.0040000618F200002 BOSCH ME17.2.42 BMS-O

ECU-notities

MICRO Infineon Tricore TC1793 To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1793 To work on this ECU you can use NewTrasdata ATTENTION - 35kW reduced power version file.
MICRO Infineon Tricore TC1793 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1793 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata ATTENTION - 35kW reduced power version file.