Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 1 firmwareversies
Voertuiggegevens
| Merk | AUDI |
| Model | TT (8N) |
| Motor | 1.8L 20V TURBO 176KW/236HP ME7.5 |
| Standaard vermogen | 239 CV / 176 kW |
| Cilinderinhoud | 1800 cc |
| Brandstof | Benzina sovralimentato |
| Voertuigtype | Auto |
ECU
| Fabrikant | BOSCH |
| Model | ME7.5 |
| Geheugen / EPROM | 29F800 PSOP44 8Mbit - Flash 512K x 16 |
Beschikbare tuning-opties:
- Advance at part load
- Boost pressure limiter for diagnostics
- Boost pressure limiter
- Boost pressure limiter 2
- Boost pressure limiter 3
- Load / throttle position reference
- Injection at part load
- Advance limiter
- Torque limiter
- Lambda enrichment for components protection
- Knock detection factor
- P
- Max boost pressure control
- Load/throttle position reference - AT
- Air mass flow (diagnostic)
- Air mass flow
Firmware-identificatoren (1)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| 0261208086 | 1037375111 |
1.42.013 | 8N0906018CA 0010 |
BOSCH ME7.5 |
Technische voertuignotities
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU-notities
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
