AUDI TT (8N) 1.8L 20V TURBO 132KW/177HP ME7.5 — ECU BOSCH ME7.5

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 32 firmwareversies

Verkrijg het bestand voor dit voertuig

Koop het bestand (origineel of geremapt)Registreer op mastertuningfile.com en bestel het bestand

Ben je een garage of tuner?

Voertuiggegevens

Merk	AUDI
Model	TT (8N)
Motor	1.8L 20V TURBO 132KW/177HP ME7.5
Standaard vermogen	179 CV / 132 kW
Cilinderinhoud	1800 cc
Brandstof	Benzina sovralimentato
Voertuigtype	Auto

ECU

Fabrikant	BOSCH
Model	ME7.5
Geheugen / EPROM	29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

Advance at part load
Boost pressure limiter for diagnostics
Boost pressure limiter
Boost pressure limiter 2
Boost pressure limiter 3
Load / throttle position reference
Injection at part load
Injection correction
Advance limiter
Torque limiter
Lambda enrichment for components protection
Knock detection factor
Speed limiter
Throttle air mass flow calculation
P
Max boost pressure control
Load/throttle position reference - AT
Air mass flow
Throttle angle management

Firmware-identificatoren (32)

Hardware-nr.	Software-nr. (chip)	Versie	Update-software	ECU
0261204898	1037350293	1.21.042	8N0906018A 0010	BOSCH ME7.5
0261204898	1037350067	1.21.017	8N0906018A 0009	BOSCH ME7.5
0261204962	1037350064	1.21.034	8N0906018B 0003	BOSCH ME7.5
0261204962	1037350294	1.21.028	8N0906018B 0004	BOSCH ME7.5
0261206439	1037354510	1.21.029	8N0906018Q 0004	BOSCH ME7.5
0261206439	1037352763	1.21.015	8N0906018Q 0003	BOSCH ME7.5
0261206440	1037354509	1.21.043	8L0906018J 0005	BOSCH ME7.5
0261206440	1037352762	1.21.010	8L0906018J 0004	BOSCH ME7.5
0261206441	1037354080	1.21.007	8N0906018M 0006	BOSCH ME7.5
0261206582	1037354079	1.00.008	8N0906018S 0007	BOSCH ME7.5
0261206582	1037352751	1.00.007	8N0906018S 0006	BOSCH ME7.5
0261206582	1037352341	1.00.017	8N0906018S 0004	BOSCH ME7.5
0261206582	1037352144	1.00.011	8N0906018S 0003	BOSCH ME7.5
0261206611	1037360276	1.21.004	8N0906018L 0003	BOSCH ME7.5
0261206790	1037354029	1.21.027	8L0906018Q 0001	BOSCH ME7.5
0261206790	1037360287	1.21.010	8L0906018Q 0002	BOSCH ME7.5
0261207027	1037354503	1.21.048	8N0906018AB 0002	BOSCH ME7.5
0261207028	1037354504	1.21.028	8N0906018AC 0002	BOSCH ME7.5
0261207212	1037354897	1.21.011	8L0906018R 0002	BOSCH ME7.5
0261207214	1037360228	1.21.011	8N0906018AH 0003	BOSCH ME7.5
0261207416	1037360843	1.21.023	8N0906018AQ 0001	BOSCH ME7.5
0261207416	1037363478	1.42.029	8N0906018AQ 0002	BOSCH ME7.5
0261207417	1037360844	1.21.011	8N0906018AM 0001	BOSCH ME7.5
0261207419	1037362515	1.21.010	8N0906018AL 0004	BOSCH ME7.5
0261207419	1037363356	1.21.002	8N0906018AL 0007	BOSCH ME7.5
0261207419	1037362936	1.21.016	8N0906018AL 0006	BOSCH ME7.5
0261207775	1037366366	1.42.018	8N0906018BC 0002	BOSCH ME7.5
0261207776	1037366835	1.42.015	8N0906018BD 0003	BOSCH ME7.5
0261207777	1037366365	1.42.006	8N0906018BE 0002	BOSCH ME7.5
0261208005	1037369398	1.42.016	8N0906018BR 0002	BOSCH ME7.5
0261208005	1037363675	1.42.016	8N0906018BR 0001	BOSCH ME7.5
0261208271	1037367513	1.42.022	8N0906018CK 0001	BOSCH ME7.5

Technische voertuignotities

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.

In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. Original EPROM PSOP 44 pins 29F400BB. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.