Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 6 firmwareversies
Voertuiggegevens
| Merk | AUDI |
| Model | SQ7 |
| Motor | 4.0L V8 TDI 320kW/429HP MD1CP014 |
| Standaard vermogen | 435 CV / 32 kW |
| Cilinderinhoud | 4000 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | Auto |
ECU
| Fabrikant | BOSCH |
| Model | MD1CP014 |
| Geheugen / EPROM | Micro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848 Kbyte |
Beschikbare tuning-opties:
- Boost pressure limiter
- Boost pressure limiter 2
- Maximum engine boost pressure F (atmospheric pressure)
- Maximum engine boost pressure F (atmospheric pressure) 2
- Boost pressure
- Boost pressure 2
- Boost pressure 3
- Boost pressure 4
- Boost pressure 5
- Boost pressure 6
- Boost pressure 7
- Protection for cylinder head overheating
- Maximum torque limitation at clutch
- Max accepted exhaust gas temperature value before turbine
- Max accepted exhaust gas temperature value before turbine 2
- Max accepted exhaust gas temperature value before turbine 3
- Protection for engine overheating
- Injection period
- Injection period 10
- IF1
- Injection period 13
- Injection opening time related to inj. pressure
- J
- Torque limiter
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 2
- Speed limiter
- Max torque profile - AT
- Maximum torque value for reverse gear
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for exhaust gas temperature before turbine 2
- Protection for fuel overheating
- Protection for oil overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure
- Specific injection pressure 2
- Driver torque request
- Start of injection
- Start of injection 2
- Torque limiter for the APS/BPS
- Turbocharger volumetric efficiency
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
- Variable geometry duty cycle limit 3
Firmware-identificatoren (6)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| — | — |
1.02.010 | 4M0997409 1004 |
BOSCH MD1CP014 |
| — | — |
1.02.008 | 4M0907409 0005 |
BOSCH MD1CP014 |
| — | — |
1.02.008 | 4M0997409 1005 |
BOSCH MD1CP014 |
| — | — |
1.02.017 | 4M0907409 0004 |
BOSCH MD1CP014 |
| — | — |
1.02.009 | 4M0907409 0008 |
BOSCH MD1CP014 |
| — | — |
1.02.009 | 4M0907409F 0002 |
BOSCH MD1CP014 |
ECU-notities
Micro Infineon Tricore TC298TP This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
