AUDI S6 (4K/C8) 3.0L V6 24V TDI 253kW/240HP MD1CS014 — ECU BOSCH MD1CS014

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 1 firmwareversies

Verkrijg het bestand voor dit voertuig

Koop het bestand (origineel of geremapt)Registreer op mastertuningfile.com en bestel het bestand

Ben je een garage of tuner?

Voertuiggegevens

Merk	AUDI
Model	S6 (4K/C8)
Motor	3.0L V6 24V TDI 253kW/240HP MD1CS014
Standaard vermogen	344 CV / 253 kW
Cilinderinhoud	3000 cc
Brandstof	Diesel mild hybrid - MHEV
Voertuigtype	Auto

ECU

Fabrikant	BOSCH
Model	MD1CS014
Geheugen / EPROM	Micro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848 Kbyte

Beschikbare tuning-opties:

Boost pressure limiter
Boost pressure limiter 2
Maximum engine boost pressure F (atmospheric pressure)
Maximum engine boost pressure F (atmospheric pressure) 2
Boost pressure
Boost pressure 2
Boost pressure 3
Boost pressure 4
Boost pressure 5
Protection for cylinder head overheating
Maximum torque limitation at clutch
Max accepted exhaust gas temperature value before turbine
Protection for engine overheating
Basic torque management at engine cranking
Basic torque management at engine cranking 2
Injection period
Injection period 2
Injection period 3
Injection period 4
Injection period 5
Injection period 6
Injection period limit
Injection period limit 3
Injection period limit 4
Injection period limit 5
Injection opening time related to inj. pressure
Injection 1
Injection 2
J
Injection 4
Injection 5
Torque limiter 2
L
Torque limiter 4
Torque limiter 5
Torque limiter 6
Torque limiter
Lambda value of the smoke limitation
Speed limiter
Maximum absolute effective torque
Maximum engine power
Max torque profile - AT
Protection for air load overheating
Protection for exhaust gas temperature before turbine
Protection for exhaust gas temperature before turbine 2
Protection for fuel overheating
Protection for oil overheating
Pressure control map over pressure regulating valve
Specific injection pressure
Specific injection pressure 2
Driver torque request
Driver torque request 2
Driver torque request 3
CAT downstream temperature sensor characterization
CAT upstream temperature sensor characterization
DPF downstream temperature sensor characterization
Turbo upstream temperature sensor characterization
Start of injection
Setpoint maximum turbocharger speed
Setpoint maximum turbocharger speed 2
Engine oil pressure target
Torque limiter for the APS/BPS
Torque limiter in recovery mode
Turbocharger volumetric efficiency

Firmware-identificatoren (1)

Hardware-nr.	Software-nr. (chip)	Versie	Update-software	ECU
—	—	1.02.032	4K0907589C 0001	BOSCH MD1CS014

ECU-notities

Micro Infineon Tricore TC299TP This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.

Verkrijg het bestand voor dit voertuig

Koop het bestand (origineel of geremapt)Registreer op mastertuningfile.com en bestel het bestand Ben je een garage of tuner?Bied deze diensten zelf aan: activeer je TuningFile-platform

Tools om deze ECU te lezen en schrijven

Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Kopen

The Genius OBD + Bench € 2.500 Kopen

Andere AUDI

100
2.5L TDI 84kW/113HP 80
1.9L TDI 66kW/88HP A4 (B5/8D)
1.9L 8V TDI 81KW/109HP PLCC A6 (C4/4A)
2.5L 10V TDI 103KW/140HP MOTRONIC 80
2.0L 8V 85kW/114HP S2 (8Z)
2.2L 20V TURBO 162kW/217HP MOTRONIC M2.3 100
2.0L 16V 85kW/114HP MOTRONIC 80
2.0L 16V 103kW/138HP MOTRONIC 80
2.8L V6 24V 128kW/172HP 100
2.0L 8V 74kW/99HP

→ Alle ECU's AUDI