English English Español Español Italiano Italiano Nederlands Nederlands Deutsch Deutsch 中文 中文 Français Français Lietuvių Lietuvių

AUDI S4 (8K/B8) 3.0L V6 24V TFSI 245kW/329HP SIMOS8.4

ECU CONTINENTAL-SIEMENS-VDO SIMOS 8.41 · 333 CV (245 kW) · 3000 cc · Benzina sovralimentato

ECU-database › AUDI › AUDI S4 (8K/B8) 3.0L V6 24V TFSI 245kW/329HP SIMOS8.4

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 8 firmwareversies

Verkrijg het bestand voor dit voertuig

Koop het bestand (origineel of geremapt)Registreer op mastertuningfile.com en bestel het bestand

Ben je een garage of tuner?

Voertuiggegevens

MerkAUDI
ModelS4 (8K/B8)
Motor3.0L V6 24V TFSI 245kW/329HP SIMOS8.4
Standaard vermogen333 CV / 245 kW
Cilinderinhoud3000 cc
BrandstofBenzina sovralimentato
VoertuigtypeAuto

ECU

FabrikantCONTINENTAL-SIEMENS-VDO
ModelSIMOS 8.41
Geheugen / EPROMMICRO ST TRICORE - 16384 Kbit - 200000

Beschikbare tuning-opties:

  • Base timing
  • Boost pressure limiter
  • Desired engine load calculation
  • High pressure fuel pump setpoint
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter
  • RPM Limiter
  • RPM Limiter 2
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • Max torque profile
  • Optimal engine moment
  • Driver torque request

Firmware-identificatoren (8)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
CAKA8K0907551 1.33.0068K0907551 0006 CONTINENTAL-SIEMENS-VDO SIMOS 8.41
CAKA8K0907551C 1.33.0298K0907551C 0002 CONTINENTAL-SIEMENS-VDO SIMOS 8.41
CAKA8K0907551C 1.33.0108K0907551C 0003 CONTINENTAL-SIEMENS-VDO SIMOS 8.41
CAKA8K0907551C 1.33.0098K0907551C 0005 CONTINENTAL-SIEMENS-VDO SIMOS 8.41
CAKA8K0907551 1.34.0188K0907551 0005 CONTINENTAL-SIEMENS-VDO SIMOS 8.41
CAKA8K0907551 1.33.0208K0907551 0004 CONTINENTAL-SIEMENS-VDO SIMOS 8.41
CCBA8K0907551D 1.33.0188K0907551D 0003 CONTINENTAL-SIEMENS-VDO SIMOS 8.41
CCBA8K0907551D 1.33.0098K0907551D 0001 CONTINENTAL-SIEMENS-VDO SIMOS 8.41

Technische voertuignotities

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

MICRO Infineon Tricore TC1796 TOTAL FILE WARNING - New Genius with security Dongle: the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. WARNING - only for New Genius without security Dongle: the ECU can be modified via OBDII with New Genius ONLY after the unlock performed through the PATCH UNLOCK with New Trasdata. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1796 TOTAL FILE WARNING - New Genius with security Dongle: the certified file present in the setting is a partial file and it cannot be used with the FULL OBD2 mode of the serial protocol FLASH_0396. In order to use the FULL OBD2 mode of the serial protocol FLASH_0396 it is necessary first to read the FULL ecu file with New Trasdata (plugin 1091 SIMOS 8.3 / plugin 1087 SIMOS 8.4) and send the .DIM file to the Race technical support for the verification. Alternatively, you can perform the PATCH UNLOCK with New Trasdata plugin 512 and then proceed with the OBD2+UNLOCK mode of the serial protocol FLASH_0396. WARNING - only for New Genius without security Dongle: the ECU can be modified via OBDII with New Genius ONLY after the unlock performed through the PATCH UNLOCK with New Trasdata. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1796 PARTIAL FILE WARNING - New Genius with security Dongle: the certified file present in the setting is a partial file and it cannot be used with the FULL OBD2 mode of the serial protocol FLASH_0396. In order to use the FULL OBD2 mode of the serial protocol FLASH_0396 it is necessary first to read the FULL ecu file with New Trasdata (plugin 1091 SIMOS 8.3 / plugin 1087 SIMOS 8.4) and send the .DIM file to the Race technical support for the verification. Alternatively, you can perform the PATCH UNLOCK with New Trasdata plugin 512 and then proceed with the OBD2+UNLOCK mode of the serial protocol FLASH_0396. WARNING - only for New Genius without security Dongle: the ECU can be modified via OBDII with New Genius ONLY after the unlock performed through the PATCH UNLOCK with New Trasdata. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

Rapid FR - Modulo Aggiuntivo Dimsport Rapid FR - Modulo Aggiuntivo Dimsport € 189 Buy Rapid FR Compact 2 - Modulo Aggiuntivo Dimsport Rapid FR Compact 2 - Modulo Aggiuntivo Dimsport € 215 Buy

→ See all add-on modules on the shop

Verkrijg het bestand voor dit voertuig

Koop het bestand (origineel of geremapt)Registreer op mastertuningfile.com en bestel het bestand Ben je een garage of tuner?Bied deze diensten zelf aan: activeer je TuningFile-platform

Tools om deze ECU te lezen en schrijven

Flex Programmatore per rimappatura centraline e cambi automatici Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Kopen The Genius The Genius OBD + Bench € 2.500 Kopen

Andere AUDI

100
2.5L TDI 84kW/113HP 80
1.9L TDI 66kW/88HP A4 (B5/8D)
1.9L 8V TDI 81KW/109HP PLCC A6 (C4/4A)
2.5L 10V TDI 103KW/140HP MOTRONIC 80
2.0L 8V 85kW/114HP S2 (8Z)
2.2L 20V TURBO 162kW/217HP MOTRONIC M2.3 100
2.0L 16V 85kW/114HP MOTRONIC 80
2.0L 16V 103kW/138HP MOTRONIC 80
2.8L V6 24V 128kW/172HP 100
2.0L 8V 74kW/99HP

→ Alle ECU's AUDI