AUDI R8 (42) MY12 4.2L V8 FSI 316kW/424HP MED9.1.1

ECU BOSCH MED9.1.1/MED9.1.2 · 430 CV (316 kW) · 4200 cc · Benzina aspirato

ECU-databaseAUDI › AUDI R8 (42) MY12 4.2L V8 FSI 316kW/424HP MED9.1.1

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 5 firmwareversies

Voertuiggegevens

MerkAUDI
ModelR8 (42) MY12
Motor4.2L V8 FSI 316kW/424HP MED9.1.1
Standaard vermogen430 CV / 316 kW
Cilinderinhoud4200 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelMED9.1.1/MED9.1.2
Geheugen / EPROMMICRO BGA+FLASH ESTERNA

Beschikbare tuning-opties:

  • Base timing
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • High pressure fuel pump setpoint
  • High fuel pressure pump limit for ECT sensor
  • Lambda enrichment for components protection
  • RPM Limiter
  • Lambda driver wish
  • Knock detection factor
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Optimal engine moment
  • Offset tolerance depending on permissible torque
  • Relative permissible torque from the pedal position in torque limitation
  • Driver torque request
  • Variable intake pulsation correction

Firmware-identificatoren (5)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
0261S028411037517082 1.00.004420910560T 0010 BOSCH MED9.1.1/MED9.1.2
0261S028411037533117 1.00.016420910560T 0020 BOSCH MED9.1.1/MED9.1.2
0261S028891037531168 1.00.020424910560J 0050 BOSCH MED9.1.1/MED9.1.2
0261S033011037535682 1.00.007424910560K 0010 BOSCH MED9.1.1/MED9.1.2
0261S033181037539065 1.00.020424910560N 0010 BOSCH MED9.1.1/MED9.1.2

Technische voertuignotities

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU-notities

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop