AUDI Q7 (4L) 3.0L V6 24V TFSI 200kW/268HP SIMOS8.3

ECU CONTINENTAL-SIEMENS-VDO SIMOS 8.3 · 272 CV (2 kW) · 3000 cc · Benzina sovralimentato

ECU-databaseAUDI › AUDI Q7 (4L) 3.0L V6 24V TFSI 200kW/268HP SIMOS8.3

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 5 firmwareversies

Voertuiggegevens

MerkAUDI
ModelQ7 (4L)
Motor3.0L V6 24V TFSI 200kW/268HP SIMOS8.3
Standaard vermogen272 CV / 2 kW
Cilinderinhoud3000 cc
BrandstofBenzina sovralimentato
VoertuigtypeAuto

ECU

FabrikantCONTINENTAL-SIEMENS-VDO
ModelSIMOS 8.3
Geheugen / EPROMMICRO ST TRICORE - 16384 Kbit - 200000

Beschikbare tuning-opties:

  • Base timing
  • Boost pressure limiter
  • Desired engine load calculation
  • Factor to correct fuel delivery system
  • High pressure fuel pump setpoint
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter
  • RPM Limiter
  • RPM Limiter 2
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • Max torque profile
  • Optimal engine moment
  • Driver torque request

Firmware-identificatoren (5)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
CJTC4L0907551 1.33.0044L0910551R 0020 CONTINENTAL-SIEMENS-VDO SIMOS 8.3
CJTC4L0907551 1.33.0044L0910551S 0010 CONTINENTAL-SIEMENS-VDO SIMOS 8.3
CJTC4L0907551 1.00.0114L0910551 0040 CONTINENTAL-SIEMENS-VDO SIMOS 8.3
CJTC4L0907551 1.33.0134L0910551R 0010 CONTINENTAL-SIEMENS-VDO SIMOS 8.3
CJTC 1.33.0094L0910551 0070 CONTINENTAL-SIEMENS-VDO SIMOS 8.3

Technische voertuignotities

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU-notities

MICRO Infineon Tricore TC1796 TOTAL FILE WARNING - New Genius with security Dongle: the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. WARNING - only for New Genius without security Dongle: the ECU can be modified via OBDII with New Genius ONLY after the unlock performed through the PATCH UNLOCK with New Trasdata. To work on this ECU you can use NewTrasdata