Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 3 firmwareversies
Voertuiggegevens
| Merk | AUDI |
| Model | Q5 (8R) |
| Motor | 2.0L 16V TFSI HYBRID 155kW/208HP MED17.1.1 |
| Standaard vermogen | 211 CV / 155 kW |
| Cilinderinhoud | 2000 cc |
| Brandstof | Benzina sovralimentato |
| Voertuigtype | Auto |
ECU
| Fabrikant | BOSCH |
| Model | MED17.1.1 |
| Geheugen / EPROM | MICRO ST TRICORE - 32768 Kbit - 400000 |
Beschikbare tuning-opties:
- Base timing
- Optimal spark timing/MBT
- Boost pressure
- Height correction for boost pressure
- Desired engine load calculation
- Exhaust gas temperature
- High pressure fuel pump setpoint
- High fuel pressure pump limit for ECT sensor
- Lambda enrichment for components protection
- Lambda driver wish
- Knock detection factor
- Throttle air mass flow calculation
- Max torque profile
- Max torque profile - AT
- Optimal engine moment
- Optimal engine moment 2
- Relative permissible torque from the pedal position in torque limitation
- Relative permissible torque from the pedal position in torque limitation 2
- Driver torque request
- Driver torque request 2
- Throttle angle management
Firmware-identificatoren (3)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| — | — |
1.94.010 | 8R0907115N 0005 |
BOSCH MED17.1.1 |
| — | — |
1.94.020 | 8R1907115C 0002 |
BOSCH MED17.1.1 |
| — | — |
1.94.014 | 8R0907115N 0006 |
BOSCH MED17.1.1 |
Technische voertuignotities
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.
ECU-notities
MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
