Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 18 firmwareversies
Voertuiggegevens
| Merk | AUDI |
| Model | Q5 (8R) |
| Motor | 2.0L 16V TDI 125kW/168HP EDC17C46 |
| Standaard vermogen | 170 CV / 125 kW |
| Cilinderinhoud | 2000 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | Auto |
ECU
| Fabrikant | BOSCH |
| Model | EDC17C46 |
| Geheugen / EPROM | MICRO ST TRICORE - 16384 Kbit - 200000 |
Beschikbare tuning-opties:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Maximum torque limitation at clutch
- Regeneration limit for DPF
- EGR valve control
- EGR valve control 2
- EGR valve control 3
- EGR valve control 4
- EGR valve control 5
- EGR valve control 6
- Max accepted exhaust gas temperature value before turbine
- Max accepted exhaust gas temperature value before turbine 2
- Protection for engine overheating
- Basic torque management at engine cranking
- Basic torque management at engine cranking 2
- Engine idle vs. ECT sensor
- Injection period
- Injection period 3
- Injection period 4
- Injection period 5
- Injection period 6
- Injection period 7
- Injection opening time related to inj. pressure
- Initialization values over pressure control valve
- Injection 1
- J
- Smoke limiter
- Lambda reference
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 2
- Speed limiter
- Max allowed torque for speed ratio
- Maximum indicated torque
- Maximum indicated torque for monitoring
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for exhaust gas temperature before turbine 2
- Protection for exhaust gas temperature before turbine 3
- Protection for fuel overheating
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure limiter for EFT sensor
- Relative permissible torque from the pedal position in torque limitation
- Specific injection pressure
- Specific injection pressure 2
- Specific pressure injection after starting
- Driver torque request
- Driver torque request AWD
- Driver torque request for reverse gear
- Torque limiter for selected gear
- Torque limiter for selected gear 2
- Torque limiter for for reverse gear
- Setpoint maximum turbocharger speed
- Torque limiter for the APS/BPS
- Torque model - torque to fuel quantity conversion - particulate regeneration mode
- Torque model - torque to fuel quantity conversion - particulate regeneration mode 2
- Variable geometry duty cycle limit
Firmware-identificatoren (18)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
| — | — |
1.94.020 | 03L906018MQ 2139 |
BOSCH EDC17C46 |
| — | — |
1.94.028 | 03L906018MQ 0229 |
BOSCH EDC17C46 |
| — | — |
1.94.016 | 03L906018MQ 9979 |
BOSCH EDC17C46 |
| — | — |
1.94.024 | 03L906018MQ 1568 |
BOSCH EDC17C46 |
| — | — |
1.94.023 | 03L906018DL 8202 |
BOSCH EDC17C46 |
| — | — |
1.94.007 | 03L906018MS 9977 |
BOSCH EDC17C46 |
| — | — |
1.94.022 | 03L906018MQ 2844 |
BOSCH EDC17C46 |
| — | — |
1.94.025 | 03L906018MQ 0798 |
BOSCH EDC17C46 |
| — | — |
1.94.042 | 03L906018MQ 2844 |
BOSCH EDC17C46 |
| — | — |
1.94.003 | 03L906018DL 9978 |
BOSCH EDC17C46 |
| — | — |
1.94.018 | 03L906018ML 9977 |
BOSCH EDC17C46 |
| — | — |
1.94.022 | 03L906018ML 0794 |
BOSCH EDC17C46 |
| — | — |
1.94.021 | 03L906018MS 0550 |
BOSCH EDC17C46 |
| — | — |
1.00.012 | 03L906018ML 0273 |
BOSCH EDC17C46 |
| — | — |
1.94.002 | 03L906018DL 9979 |
BOSCH EDC17C46 |
| — | — |
1.94.011 | 03L906018DN 9977 |
BOSCH EDC17C46 |
| — | — |
1.94.038 | 03L906018MQ 9978 |
BOSCH EDC17C46 |
| — | — |
1.94.026 | 03L906018MQ 0798 |
BOSCH EDC17C46 |
Technische voertuignotities
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.
ECU-notities
MICRO Infineon Tricore TC1767 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven