AUDI ALLROAD A4/A6 2.5L V6 24V TDI 132kW/177HP EDC15

ECU BOSCH EDC15VM+ · 179 CV (132 kW) · 2500 cc · Diesel sovralimentato

ECU-databaseAUDI › AUDI ALLROAD A4/A6 2.5L V6 24V TDI 132kW/177HP EDC15

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 10 firmwareversies

Voertuiggegevens

MerkAUDI
ModelALLROAD A4/A6
Motor2.5L V6 24V TDI 132kW/177HP EDC15
Standaard vermogen179 CV / 132 kW
Cilinderinhoud2500 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelEDC15VM+
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Boost pressure
  • EGR valve control
  • I
  • Injection correction
  • Torque limiter
  • Smoke limiter
  • Air mass flow
  • Overboost timing

Firmware-identificatoren (10)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02810102071037354429 1.13.0124Z7907401 D01 BOSCH EDC15VM+
02810104451037354376 1.13.0214Z7907401A 00 BOSCH EDC15VM+
02810104451037362124 1.13.0054Z7907401A 05 BOSCH EDC15VM+
02810104451037362124 1.13.0154Z7907401A D05 BOSCH EDC15VM+
02810108971037368155 1.13.0044Z7907401B D10 BOSCH EDC15VM+
02810108971037362747 1.13.0144Z7907401B 06 BOSCH EDC15VM+
02810108971037366613 1.13.0124Z7907401B D09 BOSCH EDC15VM+
02810108971037363867 1.13.0094Z7907401B D07 BOSCH EDC15VM+
02810113871037375826 1.13.0118E0907401J 0020 BOSCH EDC15VM+
02810113871037368568 1.13.0148E0907401J 0006 BOSCH EDC15VM+

Technische voertuignotities

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU-notities

Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial programming system NewGenius.
original EPROM PSOP 44 pins 29F800BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial programming system NewGenius.

Aanvullende modules beschikbaar

→ See all add-on modules on the shop