Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 6 firmwareversies
Voertuiggegevens
| Merk | AUDI |
| Model | A8 (D4/4H) |
| Motor | 4.2L V8 32V FSI 273kW/366HP MED17.1.1 |
| Standaard vermogen | 371 CV / 273 kW |
| Cilinderinhoud | 4200 cc |
| Brandstof | Benzina aspirato |
| Voertuigtype | Auto |
ECU
| Fabrikant | BOSCH |
| Model | MED17.1.1 |
| Geheugen / EPROM | MICRO ST TRICORE - 16384 Kbit - 200000 |
Beschikbare tuning-opties:
- Engine ignition timing versus temperature
- Base timing
- Optimal spark timing/MBT
- Desired engine load calculation
- Lambda correction for engine temperature after starting
- Exhaust gas temperature
- Factor to correct fuel delivery system
- High pressure fuel pump setpoint
- High fuel pressure pump limit for ECT sensor
- Lambda enrichment for components protection
- Lambda correction for exhaust manifold temperature
- RPM Limiter
- Engine speed limitation at high motor temperature
- Engine speed limit temperature based
- RPM limit for EOT sensor
- Lambda driver wish
- Knock detection factor
- Speed limiter
- Throttle air mass flow calculation
- Manifold absolute pressure time delay
- Characteristic manifold absolute pressure time constant of the LRS
- Optimal engine moment
- Power limit torque table
- Relative permissible torque from the pedal position in torque limitation
- Driver torque request
- Throttle angle management
Firmware-identificatoren (6)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| — | — |
1.94.011 | 4H0907560 0007 |
BOSCH MED17.1.1 |
| — | — |
1.94.027 | 4H0907560 0004 |
BOSCH MED17.1.1 |
| — | — |
1.94.010 | 4H0907560C 0006 |
BOSCH MED17.1.1 |
| — | — |
1.94.020 | 4H0907560C 0004 |
BOSCH MED17.1.1 |
| — | — |
1.94.016 | 4H0907560 0006 |
BOSCH MED17.1.1 |
| — | — |
1.94.009 | 4H0907560C 0005 |
BOSCH MED17.1.1 |
Technische voertuignotities
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.
ECU-notities
MICRO Infineon Tricore TC1796 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. WARNING: this ECU can be modified ONLY with the BOOT system NewTrasdata or NewGenius flash_0313.
MICRO Infineon Tricore TC1796 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
