AUDI A8 (D3/4E) 6.0L W12 331kW/444HP ME7.1.1

ECU BOSCH ME7.1.1 · 450 CV (331 kW) · 6000 cc · Benzina aspirato

ECU-databaseAUDI › AUDI A8 (D3/4E) 6.0L W12 331kW/444HP ME7.1.1

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 15 firmwareversies

Voertuiggegevens

MerkAUDI
ModelA8 (D3/4E)
Motor6.0L W12 331kW/444HP ME7.1.1
Standaard vermogen450 CV / 331 kW
Cilinderinhoud6000 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.1.1
Geheugen / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Beschikbare tuning-opties:

  • Base timing
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Load / throttle position reference
  • Exhaust gas temperature
  • Lambda enrichment for components protection
  • Knock detection factor
  • Manifold absolute pressure time delay
  • Optimal engine moment
  • Offset tolerance depending on permissible torque
  • Offset tolerance depending on permissible torque 2
  • Relative permissible torque from the pedal position in torque limitation
  • Relative permissible torque from the pedal position in torque limitation 2
  • Throttle angle management
  • Variable intake pulsation correction

Firmware-identificatoren (15)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612012921037382818 1.42.0094E0910018N 0020 BOSCH ME7.1.1
02612013101037382369 1.00.0124E0910018M 0030 BOSCH ME7.1.1
02612017131037393969 1.42.0244E1910018L 0050 BOSCH ME7.1.1
02612063221037362510 1.21.0144D0906018 0002 BOSCH ME7.1.1
02612066781037363028 1.21.0164D0906018 0004 BOSCH ME7.1.1
02612082031037370953 1.42.0164E0910018 0050 BOSCH ME7.1.1
02612082031037397955 1.42.0054E0910018 0130 BOSCH ME7.1.1
02612082031037377854 1.42.0064E0910018 0110 BOSCH ME7.1.1
02612082361037382532 1.42.01407C906018D 6790 BOSCH ME7.1.1
02612082401037370957 1.42.0054E0910018A 0030 BOSCH ME7.1.1
02612082401037377867 1.42.0054E0910018A 0070 BOSCH ME7.1.1
02612082401037375420 1.42.0084E0910018A 0060 BOSCH ME7.1.1
02612087121037374604 1.42.0134E0910018B 0030 BOSCH ME7.1.1
02612087141037376042 1.42.0084E0910018E 0060 BOSCH ME7.1.1
02612087141037377855 1.42.0124E0910018E 0070 BOSCH ME7.1.1

Technische voertuignotities

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU-notities

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. To work on this ECU you can use NewTrasdata This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata