AUDI A6 (C7/4G) 3.0L V6 24V TFSI 228kW/306HP SIMOS8.5

ECU CONTINENTAL-SIEMENS-VDO SIMOS 8.5 · 310 CV (228 kW) · 3000 cc · Benzina sovralimentato

ECU-databaseAUDI › AUDI A6 (C7/4G) 3.0L V6 24V TFSI 228kW/306HP SIMOS8.5

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 7 firmwareversies

Voertuiggegevens

MerkAUDI
ModelA6 (C7/4G)
Motor3.0L V6 24V TFSI 228kW/306HP SIMOS8.5
Standaard vermogen310 CV / 228 kW
Cilinderinhoud3000 cc
BrandstofBenzina sovralimentato
VoertuigtypeAuto

ECU

FabrikantCONTINENTAL-SIEMENS-VDO
ModelSIMOS 8.5
Geheugen / EPROMMICRO ST TRICORE - 16384 Kbit - 200000

Beschikbare tuning-opties:

  • Base timing
  • Boost pressure limiter
  • High pressure fuel pump setpoint
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter 4
  • Torque limiter 5
  • Torque limiter
  • RPM Limiter
  • RPM Limiter 2
  • Lambda driver wish
  • Knock detection factor
  • Max torque profile
  • Optimal engine moment
  • Driver torque request

Firmware-identificatoren (7)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
4G0907551G 1.33.0034G0907551G 0003 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
4G0907551A 1.33.0084G0907551A 0010 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
4G0907551A 1.33.0044G0907551A 0007 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
4G0907551G 1.33.0064G0907551G 0005 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
4G0907551J 1.33.0054G0907551J 0004 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
4G0907551F 1.34.0054G0907551F 0005 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
4G0907551E 1.34.0074G0907551E 0002 CONTINENTAL-SIEMENS-VDO SIMOS 8.5

ECU-notities

MICRO Infineon Tricore TC1796 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1796 TOTAL FILE WARNING - New Genius with security Dongle: the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. WARNING - only for New Genius without security Dongle: the ECU can be modified via OBDII with New Genius ONLY after the unlock performed through the PATCH UNLOCK with New Trasdata. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop