Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 5 firmwareversies
Voertuiggegevens
| Merk | AUDI |
| Model | A6 (C7/4G) |
| Motor | 3.0L V6 24V TDI 200KW/268HP EDC17CP54 |
| Standaard vermogen | 272 CV / 2 kW |
| Cilinderinhoud | 3000 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | Auto |
ECU
| Fabrikant | BOSCH |
| Model | EDC17CP54 |
| Geheugen / EPROM | Micro TC1793 + Flash esterna M58BW032FB |
Beschikbare tuning-opties:
- Boost pressure limiter
- Boost pressure limiter 2
- Boost pressure
- Boost pressure 2
- Boost pressure 3
- Boost pressure 4
- Maximum torque limitation at clutch
- Max accepted exhaust gas temperature value before turbine
- Max accepted exhaust gas temperature value at particulate sensor
- Injection opening time related to inj. pressure
- J
- Injection 2
- Injection 3
- Injection 4
- Torque limiter 2
- Torque limiter 3
- Torque limiter
- Specific injection pressure limiter
- Relative permissible torque from the pedal position in torque limitation
- Specific injection pressure
- Specific injection pressure 3
- Driver torque request
- Torque limiter for selected gear
Firmware-identificatoren (5)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| — | — |
1.00.014 | 4G2907401B 0001 |
BOSCH EDC17CP54 |
| — | — |
1.00.011 | 4G0997401F 0002 |
BOSCH EDC17CP54 |
| — | — |
1.00.040 | 4G2907401B 0007 |
BOSCH EDC17CP54 |
| — | — |
1.00.019 | 4G2907401B 0002 |
BOSCH EDC17CP54 |
| — | — |
1.00.011 | 4G2907401B 0003 |
BOSCH EDC17CP54 |
Technische voertuignotities
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.
ECU located under the wipers, it may be necessary to remove the bulkhead and the wipers. Difficulty: medium.
ECU-notities
Micro Infineon Tricore TC1793 + External Flash M58BW032FB This Setting File can be used for serial system NewGenius. ! WARNING ! This ECU is not enabled to be read. Start modification using certified original file from setting file. To work on this ECU you can use NewTrasdata
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
