AUDI A6 (C5/4B) 4.2L V8 32V 331KW/444HP ME7.1.1

ECU BOSCH ME7.1.1 · 450 CV (331 kW) · 4200 cc · Benzina aspirato

ECU-databaseAUDI › AUDI A6 (C5/4B) 4.2L V8 32V 331KW/444HP ME7.1.1

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 6 firmwareversies

Voertuiggegevens

MerkAUDI
ModelA6 (C5/4B)
Motor4.2L V8 32V 331KW/444HP ME7.1.1
Standaard vermogen450 CV / 331 kW
Cilinderinhoud4200 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.1.1
Geheugen / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Air mass flow

Firmware-identificatoren (6)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612083631037371177 1.42.0084F0910560 0050 BOSCH ME7.1.1
02612087291037376039 1.00.0184F0910560C 0030 BOSCH ME7.1.1
02612087291037371927 1.42.0084F0910560C 0010 BOSCH ME7.1.1
02612087291037374011 1.42.0174F0910560C 0020 BOSCH ME7.1.1
02612089211037378147 1.42.0074F0910560E 0020 BOSCH ME7.1.1
02612089441037374362 1.42.0074F0910560F 0010 BOSCH ME7.1.1

Technische voertuignotities

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU-notities

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.