AUDI A6 (C4/4A) 2.8L VR6 142KW/193HP ME7.1 — ECU BOSCH ME7.1/5

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 6 firmwareversies

Verkrijg het bestand voor dit voertuig

Koop het bestand (origineel of geremapt)Registreer op mastertuningfile.com en bestel het bestand

Ben je een garage of tuner?

Voertuiggegevens

Merk	AUDI
Model	A6 (C4/4A)
Motor	2.8L VR6 142KW/193HP ME7.1
Standaard vermogen	193 CV / 142 kW
Cilinderinhoud	2800 cc
Brandstof	Benzina aspirato
Voertuigtype	Auto

ECU

Fabrikant	BOSCH
Model	ME7.1/5
Geheugen / EPROM	29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

Advance at part load
Load / throttle position reference
Injection at part load
Injection at full throttle
Advance limiter
Torque limiter
Load/throttle position reference - AT
Air mass flow

Firmware-identificatoren (6)

Hardware-nr.	Software-nr. (chip)	Versie	Update-software	ECU
0261206124	1037350721	1.21.008	3B0907551E 0002	BOSCH ME7.1/5
0261206392	1037352463	1.21.006	3B0907551A 0001	BOSCH ME7.1/5
0261206645	1037374319	1.21.011	3B0907551A 0050	BOSCH ME7.1/5
0261206783	1037354053	1.21.008	3B0907551B 0002	BOSCH ME7.1/5
0261206786	1037354049	1.21.010	3B0907551BC 0001	BOSCH ME7.1/5
0261207014	1037354172	1.21.011	3B0907551BL 0001	BOSCH ME7.1/5

ECU-notities

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.

Verkrijg het bestand voor dit voertuig

Koop het bestand (origineel of geremapt)Registreer op mastertuningfile.com en bestel het bestand Ben je een garage of tuner?Bied deze diensten zelf aan: activeer je TuningFile-platform

Tools om deze ECU te lezen en schrijven

Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Kopen

The Genius OBD + Bench € 2.500 Kopen

Andere AUDI

100
2.5L TDI 84kW/113HP 80
1.9L TDI 66kW/88HP A4 (B5/8D)
1.9L 8V TDI 81KW/109HP PLCC A6 (C4/4A)
2.5L 10V TDI 103KW/140HP MOTRONIC 80
2.0L 8V 85kW/114HP S2 (8Z)
2.2L 20V TURBO 162kW/217HP MOTRONIC M2.3 100
2.0L 16V 85kW/114HP MOTRONIC 80
2.0L 16V 103kW/138HP MOTRONIC 80
2.8L V6 24V 128kW/172HP 100
2.0L 8V 74kW/99HP

→ Alle ECU's AUDI