AUDI A6 (C4/4A) 1.8L 16V TURBO 110KW/150HP ME7.5

ECU BOSCH ME7.5 · 150 CV (11 kW) · 1800 cc · Benzina sovralimentato

ECU-databaseAUDI › AUDI A6 (C4/4A) 1.8L 16V TURBO 110KW/150HP ME7.5

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 11 firmwareversies

Voertuiggegevens

MerkAUDI
ModelA6 (C4/4A)
Motor1.8L 16V TURBO 110KW/150HP ME7.5
Standaard vermogen150 CV / 11 kW
Cilinderinhoud1800 cc
BrandstofBenzina sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.5
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • Boost pressure limiter 2
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • P
  • Max boost pressure control
  • Load/throttle position reference - AT
  • Air mass flow

Firmware-identificatoren (11)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612048971037350204 1.21.0144B0906018K 0005 BOSCH ME7.5
02612060421037350228 1.21.0334B0906018 0004 BOSCH ME7.5
02612063201037350703 1.21.0184B0906018L 0004 BOSCH ME7.5
02612064491037352728 1.21.0184B0906018AA 0006 BOSCH ME7.5
02612064501037352711 1.21.0164B0906018AL 0006 BOSCH ME7.5
02612065241037352053 1.21.0164B0906018AR 0001 BOSCH ME7.5
02612065251037352054 1.21.0104B0906018BF 0002 BOSCH ME7.5
02612065251037352710 1.21.0104B0906018BF 0006 BOSCH ME7.5
02612076351037362357 1.21.0084B0906018DB 0001 BOSCH ME7.5
02612076361037362358 1.21.0124B0906018DC 0001 BOSCH ME7.5
02612076631037363030 1.42.0144B0906018CS 0002 BOSCH ME7.5

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.