Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 5 firmwareversies
Voertuiggegevens
| Merk | AUDI |
| Model | A4 (B8/8K) |
| Motor | 2.0L 16V TFSI 155kW/208HP DSG DL501 GEN1 |
| Standaard vermogen | 211 CV / 155 kW |
| Cilinderinhoud | 2000 cc |
| Brandstof | Benzina sovralimentato |
| Voertuigtype | Auto |
ECU
| Fabrikant | TEMIC |
| Model | DL501 GEN1 |
| Geheugen / EPROM | MICRO ST TRICORE - 12032 Kbit - 178000 |
Beschikbare tuning-opties:
- Gear downshift 2->1
- Gear downshift 3->2
- Gear downshift 4->3
- Gear downhift 5->4
- Gear downshift 6->5
- Gear downshift 7->6
- Maximum time for gear downshift
- Gear upshift 1->2
- Gear upshift 2->3
- Gear upshift 3->4
- Gear upshift 4->5
- Gear upshift 5->6
- Gear upshift 6->7
- Maximum torque limitation at clutch
- Gearbox torque limiter
- Gearbox torque limiter - active slip
- Gearbox torque limiter for ECT sensor
- Solenoid current for oil pressure
- Minimum oil pressure allowed at the clutch
- Maximum oil pressure allowed at the clutch
- Desired clutch oil pressure
- Maximum upshifting time for 2 gears
- Maximum upshifting time for 3 gears
- Maximum upshifting time for 4 gears
- Maximum upshifting time for 5 gears
- Maximum clutch oil pressure
- Oil pressure correction based on TOT
- Oil pressure required while moving
- S-DS
- S-US
- Clutch torque limit during acceleration - gear R
Firmware-identificatoren (5)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
| 0B5927156E | A02087 |
1.00.011 | 8K1927156AA 0006 |
TEMIC DL501 GEN1 |
| 0B5927156E | A02044 |
1.00.008 | 8K1927156 0003 |
TEMIC DL501 GEN1 |
| 0B5927156F | A02196 |
1.00.005 | 8K1927156P 0008 |
TEMIC DL501 GEN1 |
| 0B5927156F | A02087 |
1.00.008 | 8K1927156G 0009 |
TEMIC DL501 GEN1 |
| 0B5927156F | A02087 |
1.00.005 | 8K1927156H 0004 |
TEMIC DL501 GEN1 |
Technische voertuignotities
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.
ECU-notities
MICRO Infineon Tricore TC1766 This Setting File can be used for serial system NewGenius.
MICRO Infineon Tricore TC1766 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven