AUDI A3 (8L) 1.9L 8V TDI 95KW/127HP EDC15 P/P+

ECU BOSCH EDC15P+ · 129 CV (95 kW) · 1900 cc · Diesel sovralimentato

ECU-databaseAUDI › AUDI A3 (8L) 1.9L 8V TDI 95KW/127HP EDC15 P/P+

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 12 firmwareversies

Voertuiggegevens

MerkAUDI
ModelA3 (8L)
Motor1.9L 8V TDI 95KW/127HP EDC15 P/P+
Standaard vermogen129 CV / 95 kW
Cilinderinhoud1900 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelEDC15P+
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Boost pressure
  • EGR valve control
  • Injection period at part load
  • Injection period at full throttle
  • Injection correction
  • Torque limiter
  • Smoke limiter
  • Speed limiter
  • Pre-injection basic value
  • Pre-injection basic value 2
  • Air mass flow
  • Overboost timing

Firmware-identificatoren (12)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02810013081037360044 1.13.033038906019CK 1243 BOSCH EDC15P+
02810103081037360763 1.13.005038906019CK 1343 BOSCH EDC15P+
02810103081037362845 1.13.018038906019CK 1477 BOSCH EDC15P+
02810103081037360018 1.13.004038906019CK 1237 BOSCH EDC15P+
02810103081037360763 1.13.018038906019CK 1343 BOSCH EDC15P+
02810105611037362844 1.13.015038906019EF 1478 BOSCH EDC15P+
02810105611037360585 1.13.015038906019EF 1331 BOSCH EDC15P+
02810107291037363740 1.13.014038906019FP 1538 BOSCH EDC15P+
02810109811037366228 1.13.004038906019FT 1527 BOSCH EDC15P+
02810109811037366273 1.13.019038906019FT 1577 BOSCH EDC15P+
02810109811037363228 1.13.018038906019FT 1527 BOSCH EDC15P+
02810116131037368710 1.13.004038998019 5361 BOSCH EDC15P+

Technische voertuignotities

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU-notities

Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial programming system NewGenius.