AUDI A3 (8L) 1.8L 20V TURBO 132KW/177HP ME7.5

ECU BOSCH ME7.5 · 179 CV (132 kW) · 1800 cc · Benzina sovralimentato

ECU-databaseAUDI › AUDI A3 (8L) 1.8L 20V TURBO 132KW/177HP ME7.5

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 34 firmwareversies

Voertuiggegevens

MerkAUDI
ModelA3 (8L)
Motor1.8L 20V TURBO 132KW/177HP ME7.5
Standaard vermogen179 CV / 132 kW
Cilinderinhoud1800 cc
BrandstofBenzina sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.5
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • Boost pressure limiter 2
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • P
  • Max boost pressure control
  • Load/throttle position reference - AT
  • Air mass flow

Firmware-identificatoren (34)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612061451037350210 1.21.01106A906032Q 0008 BOSCH ME7.5
02612061511037350029 1.21.01106A906032AG 0007 BOSCH ME7.5
02612061971037359598 1.21.01506A906032S 0001 BOSCH ME7.5
02612061971037352356 1.21.03306A906032S 0002 BOSCH ME7.5
02612061971037352760 1.21.04406A906032S 0004 BOSCH ME7.5
02612062091037354894 1.21.01606A906032FB 0002 BOSCH ME7.5
02612062681037350201 1.21.01106A906032BB 0004 BOSCH ME7.5
02612062691037350034 1.21.02406A906032AF 0004 BOSCH ME7.5
02612064351037352354 1.21.00906A906032AS 0002 BOSCH ME7.5
02612064381037352355 1.21.00906A906032R 0002 BOSCH ME7.5
02612064381037352048 1.21.01706A906032R 0001 BOSCH ME7.5
02612064401037352762 1.21.0138L0906018J 0004 BOSCH ME7.5
02612064421037352465 1.21.0168L0906018K 0004 BOSCH ME7.5
02612064831037353908 1.21.01406A906032R 0002 BOSCH ME7.5
02612068631037354597 1.21.02406A906032DK 0001 BOSCH ME7.5
02612068641037360293 1.21.01606A906032DJ 0002 BOSCH ME7.5
02612068641037360130 1.21.02306A906032DJ 0001 BOSCH ME7.5
02612068651037360222 1.21.01506A906032DM 0001 BOSCH ME7.5
02612068921037360151 1.21.01506A906032BJ 0001 BOSCH ME7.5
02612072041037354889 1.21.02406A906032FC 0001 BOSCH ME7.5
02612072041037360294 1.21.01606A906032FC 0002 BOSCH ME7.5
02612072051037354890 1.21.01106A906032FE 0002 BOSCH ME7.5
02612072061037360241 1.21.01006A906032FG 0003 BOSCH ME7.5
02612072091037360242 1.21.01006A906032FB 0003 BOSCH ME7.5
02612072101037354895 1.21.01006A906032FF 0001 BOSCH ME7.5
02612072361037368008 1.21.02306A906032GH 0006 BOSCH ME7.5
02612074371037362288 1.21.01006A906032HK 0002 BOSCH ME7.5
02612074391037360645 1.21.00806A906032HM 0001 BOSCH ME7.5
02612074401037363908 1.42.02806A906032HN 0002 BOSCH ME7.5
02612074421037366418 1.42.01006A906032HQ 0002 BOSCH ME7.5
02612074421037360648 1.21.00906A906032HQ 0001 BOSCH ME7.5
02612074431037360649 1.21.02006A906032HR 0001 BOSCH ME7.5
02612077721037366427 1.42.01006A906032LL 0002 BOSCH ME7.5
02612086411037370117 1.42.00806A906032TB 0010 BOSCH ME7.5

Technische voertuignotities

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system NewGenius.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F400BB. On this epron can be set a KEY. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system NewGenius.