AUDI A1 (8X) 1.6L 16V TDI 85kW/114HP EDC17C64

ECU BOSCH EDC17C64 · 116 CV (85 kW) · 1600 cc · Diesel sovralimentato

ECU-databaseAUDI › AUDI A1 (8X) 1.6L 16V TDI 85kW/114HP EDC17C64

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 6 firmwareversies

Voertuiggegevens

MerkAUDI
ModelA1 (8X)
Motor1.6L 16V TDI 85kW/114HP EDC17C64
Standaard vermogen116 CV / 85 kW
Cilinderinhoud1600 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelEDC17C64
Geheugen / EPROMMICRO ST TRICORE - 32768 Kbit - 400000

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure limiter 3
  • Boost limiter correction for APS/BPS sensor
  • Protection for cylinder head overheating
  • Engine load - ceiling
  • Max accepted exhaust gas temperature value before turbine
  • Max accepted exhaust gas temperature value before turbine 2
  • Protection for engine overheating
  • Engine idle vs. ECT sensor
  • Engine idle vs. ECT sensor 2
  • Engine idle vs. ECT sensor 3
  • Engine idle vs. ECT sensor 4
  • Injection period
  • Injection period 2
  • Injection period 3
  • Injection period 4
  • Injection period - correction
  • Injection period - correction 2
  • Maximum injection period
  • Injection opening time related to inj. pressure
  • Injection 1
  • J
  • Injection 3
  • Injection 4
  • Injection 5
  • Boost pressure deviation limits for overboost detection
  • Boost pressure deviation limit for underboost detection
  • Boost pressure deviation limit for underboost detection 2
  • Torque limiter
  • Smoke limiter
  • Lambda value of the smoke limitation
  • Lambda value of the smoke limitation 2
  • Lambda value of the smoke limitation 4
  • Lambda value of the smoke limitation 5
  • Maximum indicated torque
  • Protection for air load overheating
  • Protection for exhaust gas temperature before turbine
  • Protection for exhaust gas temperature before turbine 2
  • Protection for exhaust gas temperature before turbine 3
  • Protection for fuel overheating
  • Protection for oil overheating
  • Specific injection pressure limiter
  • Specific injection pressure limiter 2
  • Specific injection pressure limiter 3
  • Specific injection pressure limiter 5
  • Specific injection pressure limiter for EFT sensor
  • Specific injection pressure limiter for EOT sensor
  • Relative permissible torque from the pedal position in torque limitation
  • Relative permissible torque from the pedal position in torque limitation 2
  • Maximum pressure ratio limit depending on temperature
  • Specific injection pressure
  • Specific injection pressure 2
  • Specific injection pressure 3
  • Specific injection pressure 4
  • Specific injection pressure 7
  • Specific air mass charge
  • Specific air mass charge 2
  • Specific air mass charge 3
  • Specific air mass charge 4
  • Specific air mass charge - correction
  • Specific air mass charge - correction 2
  • Driver torque request
  • Driver torque request AWD
  • Driver torque request for reverse gear
  • Torque limiter for selected gear
  • Setpoint maximum turbocharger speed
  • Overboost timing
  • Overboost timing 2
  • Overboost timing 3
  • Overboost timing 4
  • Turbocharger volumetric efficiency

Firmware-identificatoren (6)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1.94.01604L906021EK 0586 BOSCH EDC17C64
1.94.01504L906021EJ 1755 BOSCH EDC17C64
1.94.02904L906021EJ 3378 BOSCH EDC17C64
1.94.00704L906021EJ 0587 BOSCH EDC17C64
1.94.01004L906021EK 3374 BOSCH EDC17C64
1.94.01004L906021ES 4014 BOSCH EDC17C64

Technische voertuignotities

ECU located in the engine bay behind/close to the air filter. Difficulty: easy
OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU-notities

MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop