ALFA ROMEO SPIDER 3.2L V6 24V JTS 191kW/256HP MED7.6.2

ECU BOSCH MED7.6.2 · 260 CV (191 kW) · 3200 cc · Benzina aspirato

ECU-databaseALFA ROMEO › ALFA ROMEO SPIDER 3.2L V6 24V JTS 191kW/256HP MED7.6.2

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 1 firmwareversies

Voertuiggegevens

MerkALFA ROMEO
ModelSPIDER
Motor3.2L V6 24V JTS 191kW/256HP MED7.6.2
Standaard vermogen260 CV / 191 kW
Cilinderinhoud3200 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelMED7.6.2
Geheugen / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Beschikbare tuning-opties:

  • Advance at idle speed
  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • RPM Limiter
  • Specific injection pressure
  • Load/throttle position reference - AT
  • Air mass flow
  • S

Firmware-identificatoren (1)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
0261S010501037382541 1.93.002 BOSCH MED7.6.2

ECU-notities

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius.