ALFA ROMEO 156 Mk2 3.2L V6 24V GTA 184kW/247HP ME7.3.1

ECU BOSCH ME7.3.1 · 250 CV (184 kW) · 3200 cc · Benzina aspirato

ECU-databaseALFA ROMEO › ALFA ROMEO 156 Mk2 3.2L V6 24V GTA 184kW/247HP ME7.3.1

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 4 firmwareversies

Voertuiggegevens

MerkALFA ROMEO
Model156 Mk2
Motor3.2L V6 24V GTA 184kW/247HP ME7.3.1
Standaard vermogen250 CV / 184 kW
Cilinderinhoud3200 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.3.1
Geheugen / EPROMHYBRID ECU - 4.096Kbit 0x80000

Beschikbare tuning-opties:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Speed limiter
  • Air mass flow

Firmware-identificatoren (4)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612076091037363702 1.38.02512H52X00 BOSCH ME7.3.1
02612078111037367622 1.38.01114D51X00 BOSCH ME7.3.1
02612079671037367088 1.38.014 BOSCH ME7.3.1
02612086171037369660 1.38.007 BOSCH ME7.3.1

Technische voertuignotities

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU-notities

HYBRID ECU! To modify this ECU you need our serial protocol FLASH_0018. Please read the manual handbook to connect the specific cable. WARNING!! ECU ME7 - IX/CL = injection at full load, decrease the values to enrich the injection Note for the SELESPEED version: before disconnecting the ECU make sure that the gearbox is in idle position to avoid car blockage. In that case use the Examiner. If after a correct modification a fault code appears, simply turn on the engine and the fault will be reset automatically after some starts. This Setting File can be used for serial system : Genius or NewGenius.