ALFA ROMEO 156 Mk2 2.0L 16V JTS 122kW/164HP MED7.1.1

ECU BOSCH MED7.1.1 · 166 CV (122 kW) · 2000 cc · Benzina aspirato

ECU-databaseALFA ROMEO › ALFA ROMEO 156 Mk2 2.0L 16V JTS 122kW/164HP MED7.1.1

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 9 firmwareversies

Voertuiggegevens

MerkALFA ROMEO
Model156 Mk2
Motor2.0L 16V JTS 122kW/164HP MED7.1.1
Standaard vermogen166 CV / 122 kW
Cilinderinhoud2000 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelMED7.1.1
Geheugen / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Air mass flow

Firmware-identificatoren (9)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
0261S010071037363823 1.49.002 BOSCH MED7.1.1
0261S010071037366014 1.49.013 BOSCH MED7.1.1
0261S010071037366210 1.49.008 BOSCH MED7.1.1
0261S010101037366021 1.49.012 BOSCH MED7.1.1
0261S010101037366211 1.49.002 BOSCH MED7.1.1
0261S010171037367985 1.49.006 BOSCH MED7.1.1
0261S010191037366759 1.49.003 BOSCH MED7.1.1
0261S010211037366691 1.49.004 BOSCH MED7.1.1
0261S010271037368146 1.49.006 BOSCH MED7.1.1

Technische voertuignotities

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU-notities

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! To work on this ECU you can use NewTrasdata