TOYOTA PROACE Mk2 2.0L 16V D-4D 110kW/148HP DCM6.2A

ECU DELPHI DCM6.2A · 150 CV (11 kW) · 2000 cc · Diesel sovralimentato

ECU-databaseTOYOTA › TOYOTA PROACE Mk2 2.0L 16V D-4D 110kW/148HP DCM6.2A

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 5 firmwareversies

Voertuiggegevens

MerkTOYOTA
ModelPROACE Mk2
Motor2.0L 16V D-4D 110kW/148HP DCM6.2A
Standaard vermogen150 CV / 11 kW
Cilinderinhoud2000 cc
BrandstofDiesel sovralimentato
VoertuigtypeLCV

ECU

FabrikantDELPHI
ModelDCM6.2A
Geheugen / EPROMMICRO BGA FREESCALE MPC5674F - 32768 Kbit - 400000

Beschikbare tuning-opties:

  • Boost pressure limiter 2
  • Boost pressure limiter 3
  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure limit control
  • Boost pressure
  • Boost pressure 2
  • Boost pressure F (temperature)
  • Load / throttle position reference
  • Load / throttle position reference 2
  • Load / throttle position reference 3
  • Max exhaust gas temperature curve for full load
  • Basic torque management at engine cranking
  • Injection period
  • Injection period 2
  • Injection period 3
  • Injection period 4
  • Injection period 5
  • Injection opening time related to inj. pressure
  • J
  • Injection 2
  • Injection 3
  • Injection 4
  • Injection 5
  • Torque limiter
  • Torque limiter for smoke limitation
  • Maximum indicated torque
  • Maximum indicated virtual torque
  • Maximum engine power
  • Throttle air mass flow calculation
  • Max torque profile
  • Max torque profile - AT
  • Max torque profile for diagnostic
  • Max torque profile - MT
  • Specific injection pressure limiter
  • Specific injection pressure limiter for EFT sensor
  • Specific injection pressure
  • Specific injection pressure 2
  • Specific injection pressure 5
  • Specific injection pressure 6
  • Driver torque request
  • Driver torque request for medium speed
  • Driver torque request for low speed
  • Driver torque request from MAP sensor
  • Driver torque request at the start
  • Driver torque request for reverse gear
  • Torque limiter for gear-shift too long
  • Torque limiter for selected gear
  • Torque limiter for the APS/BPS
  • Torque limit table for IAT sensor
  • Torque limiter for EFT sensor
  • Torque limit table for EOT sensor
  • Torque limit table for the rail pressure demand
  • Torque limit table for ECT sensor
  • Take-off torque law from MAP sensor

Firmware-identificatoren (5)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
98094479809809447980 1.00.0109693142780 DELPHI DCM6.2A
98094479809809447980 1.84.0039692272580 DELPHI DCM6.2A
98094479809809447980 1.00.0059695353780 DELPHI DCM6.2A
98094479809809447980 1.00.0069692490880 DELPHI DCM6.2A
98094479809809447980 1.84.0059694053780 DELPHI DCM6.2A

Technische voertuignotities

OBD located under the steering column, to the right of the pedalboard, accessible without removing anything.

ECU-notities

Microprocessor BGA FREESCALE MPC5674F This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata