TOYOTA COASTER 4.0L 110kW/148HP DENSO

ECU DENSO 175822-799 · 150 CV (11 kW) · 4000 cc · Diesel sovralimentato

ECU-databaseTOYOTA › TOYOTA COASTER 4.0L 110kW/148HP DENSO

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 6 firmwareversies

Voertuiggegevens

MerkTOYOTA
ModelCOASTER
Motor4.0L 110kW/148HP DENSO
Standaard vermogen150 CV / 11 kW
Cilinderinhoud4000 cc
BrandstofDiesel sovralimentato
VoertuigtypeTir

ECU

FabrikantDENSO
Model175822-799
Geheugen / EPROMMICRO NEC 76F0039AGD - 512Kbit - 80000

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Boost pressure
  • Variable boost pressure 1
  • Variable boost pressure 2
  • Injection correction 2
  • Injection opening time related to inj. pressure
  • Max injection limit
  • Max injection limit 2
  • Max injection limit 3
  • Max injection limit for APS/BPS sensor
  • Max injection limit - limp mode
  • Injection correction
  • Injection correction for IAT sensor
  • J
  • Specific injection pressure limiter
  • Specific injection pressure
  • Specific injection pressure 2
  • Specific injection pressure 3
  • Specific injection pressure 4
  • Air mass flow
  • Variable geometry duty cycle limit

Firmware-identificatoren (6)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
89663-36430- 1.67.00233643000 DENSO 175822-799
89663-36082- 1.67.00433608200 DENSO 175822-799
89663-36083- 1.67.00333608300 DENSO 175822-799
89663-36231- 1.67.00433623100 DENSO 275922-320
89663-36390- 1.67.00533639000 DENSO 275922-320
89663-36581- 1.67.00333658100 DENSO 275922-320

ECU-notities

Microprocessor NEC 76F0038AGD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor NEC 76F0085 This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata