TOYOTA CAMRY (XV40) 2.0L 16V 108kW/144HP DENSO

ECU DENSO 275036-1152 · 147 CV (108 kW) · 2000 cc · Benzina aspirato

ECU-databaseTOYOTA › TOYOTA CAMRY (XV40) 2.0L 16V 108kW/144HP DENSO

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 7 firmwareversies

Voertuiggegevens

MerkTOYOTA
ModelCAMRY (XV40)
Motor2.0L 16V 108kW/144HP DENSO
Standaard vermogen147 CV / 108 kW
Cilinderinhoud2000 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantDENSO
Model275036-1152
Geheugen / EPROMMICRO NEC 76F0038AGD - 6144 Kbit - C0000

Beschikbare tuning-opties:

  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Spark advance correction - valve timing position 1
  • Spark advance correction - valve timing position 2
  • Electronic throttle control
  • Electronic throttle control 2
  • Electronic throttle control 3
  • Lambda correction f(IAT)
  • Lambda correction f(ECT)
  • Lambda correction f(ECT) 2
  • Torque limiter 2
  • Advance limiter for component protection 1
  • Torque limiter
  • Lambda enrichment - open loop
  • RPM Limiter
  • Lambda driver wish
  • Speed limiter
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Exhaust gas temperature sensor
  • Variable valve timing - inlet

Firmware-identificatoren (7)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
89663-06890- 1.67.00830689000 DENSO 275036-1152
89663-06B40- 1.67.011306B4000 DENSO 275036-1152
89663-06561- 1.67.00730656100 DENSO 275036-1152
89663-06450- 1.67.00830645000 DENSO 275036-1152
89663-06532- 1.00.00830653200 DENSO 275036-1152
89663-06C30- 1.67.012306C3000 DENSO 275036-1152
89663-33590- 1.67.01233359000 DENSO 275036-9540

Technische voertuignotities

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

Microprocessor NEC 76F0038AGD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor NEC 76F0038GD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop