MERCEDES E CLASS W211 E320 3.2L V6 165kW/221HP ME2.8

ECU BOSCH ME2.8 · 224 CV (165 kW) · 3200 cc · Benzina aspirato

ECU-databaseMERCEDES › MERCEDES E CLASS W211 E320 3.2L V6 165kW/221HP ME2.8

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 4 firmwareversies

Voertuiggegevens

MerkMERCEDES
ModelE CLASS W211
MotorE320 3.2L V6 165kW/221HP ME2.8
Standaard vermogen224 CV / 165 kW
Cilinderinhoud3200 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME2.8
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Base timing
  • Lambda/AFR full load/WOT
  • Lambda/AFR mixture at part load
  • Optimal spark timing/MBT
  • Advance at part load
  • Load / throttle position reference
  • RPM Limiter
  • Speed limiter
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Relative permissible torque from the pedal position in torque limitation
  • Requested engine filling

Firmware-identificatoren (4)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
11215326791037351805 1.16.011 BOSCH ME2.8
11215344791037365225 1.16.008 BOSCH ME2.8
11215366791037365308 1.16.006 BOSCH ME2.8
11215385791037375209 1.16.006 BOSCH ME2.8

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. This Setting File can be used for serial system NewGenius. ! WARNING ! This ECU is not enabled to be read. Start modification using certified original file from setting file. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. To work on this ECU you can use NewTrasdata In order to read and write this EPROM with the programmer you need the adapter for PSOP and the card 01B with EMP20, or 202B with EMP21. On this epron can be set a KEY.