GENESIS G70 3.3L T-GDi 276kW/370HP SIM2K-260

ECU CONTINENTAL-SIEMENS-VDO SIM2K-260 · 375 pk (276 kW) · 3300 cc · Benzina sovralimentato

Firmware-identificatoren: IKKN3TMW_F0C, E6W248E1, A2C1980170001, IKHK3TMS_H0A, A2C1980170101

ECU-database › GENESIS › GENESIS G70 3.3L T-GDi 276kW/370HP SIM2K-260

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 2 firmwareversies

Wat je voor dit voertuig kunt bestellen

Origineel ECU-bestand CONTINENTAL-SIEMENS-VDO SIM2K-260

30 credits

Het standaardbestand voor deze ECU.

Registreer gratis en bestel

Stage 1-bestand

vanaf 100 credits

Levering binnen 1-2 uur (tijdens werkuren). Levenslange garantie op het bestand.

Registreer gratis en bestel

Uitschakelingen en opties

Voeg ze toe aan het bestand of bestel ze los.

→ Bekijk de volledige prijslijst

Registreer gratis en bestel

Zo bestel je: gratis registratie, upload het originele bestand dat uit de ECU is gelezen en kies de dienst. 1 credit = € 1.

Heb je slaves of verkoop je ook bestanden door?Open je eigen file service-portaal onder je eigen merk Ontdek TuningFile →

Voertuiggegevens

MerkGENESIS
ModelG70
Motor3.3L T-GDi 276kW/370HP SIM2K-260
Standaard vermogen375 pk / 276 kW
Cilinderinhoud3300 cc
BrandstofBenzina sovralimentato
VoertuigtypeAuto

ECU

FabrikantCONTINENTAL-SIEMENS-VDO
ModelSIM2K-260
Geheugen / EPROMMICRO ST TRICORE - 32768 - 400000

Beschikbare tuning-opties:

  • Base timing
  • Base timing 2
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Lambda correction
  • Load / throttle position reference
  • Exhaust gas temperature
  • Factor to correct fuel delivery system
  • Engine idle
  • High pressure fuel pump setpoint
  • High pressure fuel pump setpoint 2
  • High pressure fuel pump setpoint 3
  • Intake pressure protection
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter
  • Lambda enrichment for components protection
  • RPM Limiter
  • Lambda reference
  • Knock detection factor
  • MAF sensor calibration
  • Optimal engine moment
  • Maximum pressure ratio limit depending on temperature
  • Pop/blow off valve offset - close model
  • Pop/blow off valve offset - open model
  • Driver torque request
  • Setpoint maximum turbocharger speed
  • Throttle angle management
  • Torque limit table for EOT sensor
  • Torque limit table for ECT sensor
  • Wastegate duty-cycle

Firmware-identificatoren (2)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
A2C1980170001E6W248E1 1.96.009IKKN3TMW_F0C CONTINENTAL-SIEMENS-VDO SIM2K-260
A2C1980170101E6W248E1 1.00.002IKHK3TMS_H0A CONTINENTAL-SIEMENS-VDO SIM2K-260

Technische voertuignotities

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU-notities

EPROM AM29BDD160G / S29CD016G PQFQ 80 Pin - Microprocessor MPC 563/4 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

Verkrijg het bestand voor dit voertuig

Powered by TuningFile