FORD MONDEO Mk2 2.0L TDdi 84kW/115HP WP.41

ECU DELPHI DCM3.1 · 114 CV (84 kW) · 2000 cc · Diesel sovralimentato

ECU-databaseFORD › FORD MONDEO Mk2 2.0L TDdi 84kW/115HP WP.41

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 28 firmwareversies

Voertuiggegevens

MerkFORD
ModelMONDEO Mk2
Motor2.0L TDdi 84kW/115HP WP.41
Standaard vermogen114 CV / 84 kW
Cilinderinhoud2000 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantDELPHI
ModelDCM3.1
Geheugen / EPROM28F200 PSOP44 2Mbit - Flash 128K x16 (256K x 8)

Beschikbare tuning-opties:

  • Injection correction
  • Torque limiter
  • Air mass flow

Firmware-identificatoren (28)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1S4FACPUPIAC0.HEX 1.34.005 DELPHI DCM3.1
1S7FBACPUPL3E0.HEX 1.34.008 DELPHI DCM3.1
1S7FBACPUPL3E0.HEX 1.34.005 DELPHI DCM3.1
1S7FBADPUPL3E1.HEX 1.34.012 DELPHI DCM3.1
1S7FCADPUPL3G1.HEX 1.34.018 DELPHI DCM3.1
1S7FCAEPUPL3G2.HEX 1.34.004 DELPHI DCM3.1
1S7FCAEPUPL3G2.HEX 1.34.005 DELPHI DCM3.1
1S7FCAEPUPL3G2.HEX 1.34.011 DELPHI DCM3.1
1S7FCAFPUPL3G3.HEX 1.34.010 DELPHI DCM3.1
1S7FCAGPUPL3G4.HEX 1.34.003 DELPHI DCM3.1
1S7FCAHPUPL3G5.HEX 1.34.005 DELPHI DCM3.1
1S7FCAHPUPL3G5.HEX 1.34.006 DELPHI DCM3.1
1U7AEAAPUQL3G3.HEX 1.34.010 DELPHI DCM3.1
2S71BBPUQP4G1.HEX 1.34.003 DELPHI DCM3.1
2S71BCPUQQ5G0.HEX 1.34.006 DELPHI DCM3.1
2S71CGPUQQ6H0.HEX 1.34.005 DELPHI DCM3.1
2S71DBPUQP4E1.HEX 1.34.007 DELPHI DCM3.1
2S7AAHCPUQL3G2.HEX 1.34.009 DELPHI DCM3.1
2S7AAHCPUQL3G2.HEX 1.34.004 DELPHI DCM3.1
2S7AAHDPUQL3G4.HEX 1.34.006 DELPHI DCM3.1
2S7AAHDPUQL3G4.HEX 1.34.017 DELPHI DCM3.1
2S7ABMCPUQL3E2.HEX 1.34.006 DELPHI DCM3.1
2S7ABPFPUQP2H0.HEX 1.34.011 DELPHI DCM3.1
2S7ABPKPUQQ5HB.HEX 1.34.006 DELPHI DCM3.1
2S7ADAPURR2E0.HEX 1.34.007 DELPHI DCM3.1
3S7AVEPUQQ5H8.HEX 1.34.007 DELPHI DCM3.1
3S7AVFPUQQ5HD.HEX 1.34.004 DELPHI DCM3.1
1.34.004 FORD EFI WP.41

Technische voertuignotities

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

Original EPROM PSOP 44 pin 28F200. In order to read and write this EPROM with the programmer you need the adapter for PSOP and the card 01B with EMP20, or 202B with EMP21. This Setting File can be used for serial system NewGenius.
Original EPROM PSOP 44 pin 28F200. In order to read and write this EPROM with the programmer you need the adapter for PSOP and the card 01B with EMP20, or 202B with EMP21. On this epron can be set a KEY.
Original EPROM PSOP 44 pin 28F200. In order to read and write this EPROM with the programmer you need the adapter for PSOP and the card 01B with EMP20, or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial system NewGenius.
Original EPROM PSOP 44 pin 28F200. This Setting File can be used for serial system NewGenius. In order to read and write this EPROM with the programmer you need the adapter for PSOP and the card 01B with EMP20, or 202B with EMP21. On this epron can be set a KEY.

Aanvullende modules beschikbaar

→ See all add-on modules on the shop