Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
3 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | LAND ROVER |
| Modelis | DEFENDER MY 2019 (L663) |
| Variklis | 2.0L 16V TD 177kW/238HP MEDC17.9 |
| Serijinė galia | 241 CV / 177 kW |
| Darbinis tūris | 2000 cc |
| Kuras | Diesel sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | BOSCH |
| Modelis | MEDC17.9 |
| Atmintis / EPROM | MICRO ST TRICORE - 32768 - 400000 |
Galimos derinimo operacijos / parinktys:
- Boost pressure limiter
- Boost pressure
- Maximum torque at gear selection
- Maximum torque limitation at clutch
- Max accepted exhaust gas temperature value after turbine
- Max accepted exhaust gas temperature value before turbine
- Max accepted exhaust gas temperature value before turbine 2
- Max accepted exhaust gas temperature value at particulate sensor
- Protection for engine overheating
- Engine reference power at crankshaft
- Basic torque management at engine cranking
- Engine idle
- Gearbox maximum torque allowed
- Injection period
- Injection opening time related to inj. pressure
- Injection opening time related to inj. pressure 2
- J
- Torque limiter 2
- Torque limiter 3
- Torque limiter 4
- Torque limiter 5
- Torque limiter
- Lambda value of the smoke limitation
- Maximum indicated torque
- Maximum engine torque at crank shaft
- Maximum valid simulated soot mass
- Specific injection pressure limiter
- Relative permissible torque from the pedal position in torque limitation
- Specific injection pressure
- Specific injection pressure 2
- Driver torque request
- Driver torque request for high speed
- Torque limiter for selected gear
- Torque limiter for the APS/BPS
- Torque limiter for EFT sensor
- Variable geometry duty cycle limit
Programinės įrangos identifikatoriai (3)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| HY32-12B684-FAA | JY32-14C204-FAB |
1.94.012 | JY32-12K532-FAC |
BOSCH MEDC17.9 |
| HY32-12B684-FAA | H7A3-14C204-FCD |
1.94.005 | JX63-12K532-FBG |
BOSCH MEDC17.9 |
| L8B2-12B684-FAA | L8B2-12K532-FJM |
1.94.007 | L8B2-12K532-FJM |
BOSCH MEDC17.9 |
Techninės pastabos apie automobilį
ECU located under the wipers, it may be necessary to remove the bulkhead and the wipers. Difficulty: medium.
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.
ECU pastabos
MICRO Infineon Tricore TC1793 This Setting File can be used for serial programming system NewGenius. To work on this ECU you can use NewTrasdata
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
