LAND ROVER RANGE ROVER (L322) 2.9L 24V TD6 130kW/174HP DDE 4.0

ECU BOSCH DDE 4.0 · 177 CV (13 kW) · 2900 cc · Diesel sovralimentato

ECU duomenų bazėLAND ROVER › LAND ROVER RANGE ROVER (L322) 2.9L 24V TD6 130kW/174HP DDE 4.0

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 6 programinės įrangos versijos

Transporto priemonės duomenys

MarkėLAND ROVER
ModelisRANGE ROVER (L322)
Variklis2.9L 24V TD6 130kW/174HP DDE 4.0
Serijinė galia177 CV / 13 kW
Darbinis tūris2900 cc
KurasDiesel sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisDDE 4.0
Atmintis / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Galimos derinimo operacijos / parinktys:

  • Boost pressure limiter
  • Boost pressure
  • Injection at part load
  • Injection at full throttle
  • Torque limiter
  • Smoke limiter
  • Speed limiter
  • Specific injection pressure
  • Air mass flow
  • Overboost timing
  • Overboost timing 1-2 gear
  • Overboost timing 5 gear
  • Overboost timing 3-4 gear

Programinės įrangos identifikatoriai (6)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
1.03.015 BOSCH DDE 4.0
77894661037351777 1.03.020C118 BOSCH DDE 4.0
77894661037351935 1.03.009C118 BOSCH DDE 4.0
77913671037361814 1.03.019C226 BOSCH DDE 4.0
77913671037361814 1.03.001C230 BOSCH DDE 4.0
XXXXXXX1037361814 1.03.011C224 BOSCH DDE 4.0

ECU pastabos

Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F400BT. This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY.

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):