Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 2 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | ABARTH |
| Modelis | GRANDE PUNTO |
| Variklis | 1.4L 16V TJET 114kW/153HP ME7.9.10 |
| Serijinė galia | 155 CV / 114 kW |
| Darbinis tūris | 1400 cc |
| Kuras | Benzina sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | BOSCH |
| Modelis | ME7.9.10 |
| Atmintis / EPROM | MICRO ST - 6656 Kbit |
Galimos derinimo operacijos / parinktys:
- Base timing
- Advance at idle speed
- Optimal spark timing/MBT
- Spark advance correction for ECT sensor
- Boost pressure limiter 3
- Boost pressure limiter 4
- Desired engine load calculation
- Lambda correction for engine temperature after starting
- Compression ratio for turbocharger protection
- Desired pressure ratio
- Exhaust gas temperature
- Factor to correct fuel delivery system
- Lambda enrichment for components protection
- Lambda correction for exhaust manifold temperature
- RPM Limiter
- RPM Limiter 2
- RPM limiter 3
- RPM limit for EOT sensor
- Lambda driver wish
- Knock detection factor
- Speed limiter
- Maximum indicated torque
- Throttle air mass flow calculation
- Max torque profile
- Optimal engine moment
- Boost pressure threshold cycles for the overboost recognition
- Offset tolerance depending on permissible torque
- Power limit torque table
- Relative permissible torque from the pedal position in torque limitation
- % relative air filling limit depending on IAT
- Driver torque request
- Throttle angle management
- Turbocharger volumetric efficiency
- Wastegate duty-cycle
Programinės įrangos identifikatoriai (2)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| 0261201685 | 1037391129 |
1.91.032 | — |
BOSCH ME7.9.10 |
| 0261S04662 | 1037397661 |
1.91.034 | — |
BOSCH ME7.9.10 |
Techninės pastabos apie automobilį
ECU located on or behind the engine block. It may be necessary to remove the engine cover. Difficulty: easy.
OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.
ECU pastabos
Microprocessor ST10F275 This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
