VOLKSWAGEN TRANSPORTER (T5) 3.2L VR6 FSI 173kW/232HP ME7.1.1

ECU BOSCH ME7.1.1 · 235 CV (173 kW) · 3200 cc · Benzina aspirato

ECU 数据库VOLKSWAGEN › VOLKSWAGEN TRANSPORTER (T5) 3.2L VR6 FSI 173kW/232HP ME7.1.1

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 7 固件版本

车辆数据

品牌VOLKSWAGEN
型号TRANSPORTER (T5)
发动机3.2L VR6 FSI 173kW/232HP ME7.1.1
原厂功率235 CV / 173 kW
排量3200 cc
燃料Benzina aspirato
车辆类型LCV

ECU

制造商BOSCH
型号ME7.1.1
存储 / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

可用的调校选项:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor

固件标识 (7)

硬件号软件号 (chip)版本升级软件ECU
02612012671037380056 1.21.010022906032JA 8694 BOSCH ME7.1.1
02612012701037381602 1.21.003022906032JD 8697 BOSCH ME7.1.1
02612019451037386671 1.21.008022997032Q 0842 BOSCH ME7.1.1
02612067361037354790 1.21.008022906032F 0004 BOSCH ME7.1.1
02612080721037372816 1.21.009022906032 7001 BOSCH ME7.1.1
02612087521037371708 1.21.016022906032GM 6367 BOSCH ME7.1.1
0261S046491037396293 1.21.009022906032MK 3035 BOSCH ME7.1.1

ECU 说明

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. To work on this ECU you can use NewTrasdata This Setting File can be used for serial system : Genius or NewGenius.

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop