VOLKSWAGEN PASSAT 8 (B8) 1.4L 16V TSI 96kW/129HP MED17.5.20

ECU BOSCH MED17.5.20 · 131 CV (96 kW) · 1400 cc · Benzina sovralimentato

ECU 数据库VOLKSWAGEN › VOLKSWAGEN PASSAT 8 (B8) 1.4L 16V TSI 96kW/129HP MED17.5.20

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 1 固件版本

车辆数据

品牌VOLKSWAGEN
型号PASSAT 8 (B8)
发动机1.4L 16V TSI 96kW/129HP MED17.5.20
原厂功率131 CV / 96 kW
排量1400 cc
燃料Benzina sovralimentato
车辆类型Auto

ECU

制造商BOSCH
型号MED17.5.20
存储 / EPROMMICRO ST TRICORE - 12032 Kbit - 178000

可用的调校选项:

  • Base timing
  • Optimal spark timing/MBT
  • Advance correction
  • Height correction for boost pressure
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Compression ratio for turbocharger protection
  • Compression ratio limiting for compressor depending on IAT sensor
  • Exhaust gas temperature
  • Gearbox maximum torque allowed
  • High pressure fuel pump setpoint
  • High fuel pressure pump limit for ECT sensor
  • High pressure fuel pump setpoint - limp home mode
  • High-pressure fuel pump - in catalyst heating monitoring mode
  • Intake valve lift
  • Intake valve lift - catalyst heating
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM limiter 3
  • RPM limiter 4
  • Lambda driver wish
  • Knock detection factor
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Maximum intake manifold pressure
  • Max torque profile
  • Optimal engine moment
  • Power limit torque table
  • Relative permissible torque from the pedal position in torque limitation
  • Relative permissible torque from the pedal position in torque limitation - sport/race mode
  • Pressure ratio depending on IAT
  • Driver torque request
  • Driver torque request AWD
  • Driver torque request for reverse gear
  • Throttle angle management

固件标识 (1)

硬件号软件号 (chip)版本升级软件ECU
0261S06350 1.94.00703C906022AS 4150 BOSCH MED17.5.20

ECU 说明

MICRO Infineon Tricore TC1766 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata