VOLKSWAGEN PASSAT 7 (B7) 3.6L V6 FSI 220kW/295HP MED17.1.6

ECU BOSCH MED17.1.6 · 299 CV (22 kW) · 3600 cc · Benzina aspirato

ECU 数据库VOLKSWAGEN › VOLKSWAGEN PASSAT 7 (B7) 3.6L V6 FSI 220kW/295HP MED17.1.6

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 8 固件版本

车辆数据

品牌VOLKSWAGEN
型号PASSAT 7 (B7)
发动机3.6L V6 FSI 220kW/295HP MED17.1.6
原厂功率299 CV / 22 kW
排量3600 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商BOSCH
型号MED17.1.6
存储 / EPROMMICRO ST TRICORE - 32768 Kbit - 400000

可用的调校选项:

  • Base timing
  • Advance at idle speed
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • Factor to correct fuel delivery system 2
  • High pressure fuel pump setpoint
  • High fuel pressure pump limit for ECT sensor
  • Torque limiter
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM/speed limiter 2
  • RPM Limiter 2
  • RPM limiter 3
  • RPM limiter 4
  • RPM Limiter 5
  • RPM Limiter 6
  • Lambda driver wish
  • Knock detection factor
  • MAF sensor calibration
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Optimal engine moment
  • Power limit torque table
  • Relative permissible torque from the pedal position in torque limitation
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Torque limiter for selected gear
  • Throttle angle management

固件标识 (8)

硬件号软件号 (chip)版本升级软件ECU
1.00.00703H906023N 1161 BOSCH MED17.1.6
1.00.00703H906023AJ 1812 BOSCH MED17.1.6
1.00.00603H906023BF 4359 BOSCH MED17.1.6
1.00.01003H906023L 2009 BOSCH MED17.1.6
1.00.00503H906023BL 6181 BOSCH MED17.1.6
1.00.01703H906023L 1159 BOSCH MED17.1.6
1.00.02703H906023L 2758 BOSCH MED17.1.6
1.00.01303H906023N 2760 BOSCH MED17.1.6

ECU 说明

MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop