VOLKSWAGEN PASSAT 7 (B7) 3.6L V6 FSI 206kW/276HP MED17.1.6

ECU BOSCH MED17.1.6 · 280 CV (206 kW) · 3600 cc · Benzina aspirato

ECU 数据库VOLKSWAGEN › VOLKSWAGEN PASSAT 7 (B7) 3.6L V6 FSI 206kW/276HP MED17.1.6

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 5 固件版本

车辆数据

品牌VOLKSWAGEN
型号PASSAT 7 (B7)
发动机3.6L V6 FSI 206kW/276HP MED17.1.6
原厂功率280 CV / 206 kW
排量3600 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商BOSCH
型号MED17.1.6
存储 / EPROMMICRO ST TRICORE - 32768 Kbit - 400000

可用的调校选项:

  • Base timing
  • Advance at idle speed
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • Factor to correct fuel delivery system 2
  • High pressure fuel pump setpoint
  • High fuel pressure pump limit for ECT sensor
  • Torque limiter
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM/speed limiter 2
  • RPM Limiter 2
  • RPM limiter 3
  • RPM limiter 4
  • RPM Limiter 5
  • RPM Limiter 6
  • Lambda driver wish
  • Knock detection factor
  • MAF sensor calibration
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Optimal engine moment
  • Power limit torque table
  • Relative permissible torque from the pedal position in torque limitation
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Torque limiter for selected gear
  • Throttle angle management

固件标识 (5)

硬件号软件号 (chip)版本升级软件ECU
1.94.01603H906023E 2415 BOSCH MED17.1.6
1.94.01703H906023DC 3177 BOSCH MED17.1.6
1.94.01303H906023BE 3908 BOSCH MED17.1.6
1.94.01103H906023BD 3907 BOSCH MED17.1.6
1.94.01403H906023E 3013 BOSCH MED17.1.6

ECU 说明

MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop