VOLKSWAGEN PASSAT 6 (B6) 2.0L 16V TSI 147kW/197HP MED17

ECU BOSCH MED17.5 · 200 CV (147 kW) · 2000 cc · Benzina sovralimentato

ECU 数据库VOLKSWAGEN › VOLKSWAGEN PASSAT 6 (B6) 2.0L 16V TSI 147kW/197HP MED17

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 29 固件版本

车辆数据

品牌VOLKSWAGEN
型号PASSAT 6 (B6)
发动机2.0L 16V TSI 147kW/197HP MED17
原厂功率200 CV / 147 kW
排量2000 cc
燃料Benzina sovralimentato
车辆类型Auto

ECU

制造商BOSCH
型号MED17.5
存储 / EPROMMICRO ST TRICORE - 12032 Kbit - 178000

可用的调校选项:

  • Base timing
  • Base timing 2
  • Optimal spark timing/MBT
  • Advance correction
  • Height correction for boost pressure
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Maximum pressure ratio limit for diagnosis
  • Exhaust gas temperature
  • Filling factor limit
  • Filling factor limit 2
  • Factor for reducing maximum filling
  • Gearbox maximum torque allowed
  • High pressure fuel pump setpoint
  • High fuel pressure pump limit for ECT sensor
  • High fuel pressure pump limit
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM Limiter 2
  • RPM limiter 3
  • RPM limiter 4
  • RPM Limiter 5
  • RPM limiter - N
  • RPM limiter in Park position
  • RPM limit for ECT sensor
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • Maximum boost pressure load
  • Maximum boost pressure load 2
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Maximum negative deviation for boost overcharge
  • Optimal engine moment
  • Power limit torque table
  • Relative permissible torque from the pedal position in torque limitation
  • Relative permissible torque from the pedal position in torque limitation - sport/race mode
  • Pressure ratio depending on IAT
  • Maximum pressure ratio limit depending on temperature
  • Driver torque request
  • Driver torque request AWD
  • Driver torque request for reverse gear
  • Throttle angle management

固件标识 (29)

硬件号软件号 (chip)版本升级软件ECU
1.94.01006J906026EQ 8445 BOSCH MED17.5
1.94.01506J906026BP 3510 BOSCH MED17.5
1.94.01706J906026DA 5896 BOSCH MED17.5
1.94.02706J906026AK 2428 BOSCH MED17.5
1.94.01106J906026DC 4674 BOSCH MED17.5
1.94.01606J906026E 2425 BOSCH MED17.5
1.94.00906J906026AG 4061 BOSCH MED17.5
1.94.01506J906026DC 6997 BOSCH MED17.5
1.94.01406J906026CP 3555 BOSCH MED17.5
1.94.01206J906026CP 3948 BOSCH MED17.5
1.94.01506J906026BR 3287 BOSCH MED17.5
1.94.01306J906026AL 1813 BOSCH MED17.5
1.94.02606J906026BR 4063 BOSCH MED17.5
1.94.00206J906026FC 5623 BOSCH MED17.5
1.94.01006J906026AF 3318 BOSCH MED17.5
1.94.03006J906026BN 3509 BOSCH MED17.5
1.94.02506J906026FA 5843 BOSCH MED17.5
1.94.02706J906026DA 4671 BOSCH MED17.5
1.94.01706J906026AG 3319 BOSCH MED17.5
1.94.02206J906026DA 6987 BOSCH MED17.5
1.94.01206J906026D 3505 BOSCH MED17.5
1.94.01306J906026EQ 5201 BOSCH MED17.5
1.94.01106J906026AK 1812 BOSCH MED17.5
1.94.01306J906026BN 2876 BOSCH MED17.5
1.94.01206J906026D 2424 BOSCH MED17.5
1.94.01106J906027FE 5369 BOSCH MED17.5.2
1.94.01506J906027F 8068 BOSCH MED17.5.2
1.94.01606J906027FD 3951 BOSCH MED17.5.2
1.94.01706J906027FE 3952 BOSCH MED17.5.2

ECU 说明

MICRO Infineon Tricore TC1766 ATTENTION!! On this car only serial reprogramming is possible. This Setting File can be used for serial system NewGenius.
MICRO Infineon Tricore TC1766 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1766 To work on this ECU you can use NewTrasdata WARNING! ECU MED9 - IX/CL = injection at full load, decrease the values to enrich the injection
MICRO Infineon Tricore TC1767 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop