VOLKSWAGEN PASSAT 6 (B6) 2.0L 16V TDI 103kW/138HP EDC17C46

ECU BOSCH EDC17C46 · 140 CV (103 kW) · 2000 cc · Diesel sovralimentato

ECU 数据库VOLKSWAGEN › VOLKSWAGEN PASSAT 6 (B6) 2.0L 16V TDI 103kW/138HP EDC17C46

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 27 固件版本

车辆数据

品牌VOLKSWAGEN
型号PASSAT 6 (B6)
发动机2.0L 16V TDI 103kW/138HP EDC17C46
原厂功率140 CV / 103 kW
排量2000 cc
燃料Diesel sovralimentato
车辆类型Auto

ECU

制造商BOSCH
型号EDC17C46
存储 / EPROMMICRO ST TRICORE - 16384 Kbit - 200000

可用的调校选项:

  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure
  • Maximum torque limitation at clutch
  • Regeneration limit for DPF
  • EGR valve control
  • EGR valve control 2
  • EGR valve control 3
  • EGR valve control 4
  • EGR valve control 5
  • EGR valve control 6
  • Max accepted exhaust gas temperature value before turbine
  • Max accepted exhaust gas temperature value before turbine 2
  • Protection for engine overheating
  • Basic torque management at engine cranking
  • Basic torque management at engine cranking 2
  • Engine idle vs. ECT sensor
  • Injection period
  • IF1
  • Injection period 4
  • Injection period 5
  • Injection period 6
  • Injection period 7
  • Injection period 8
  • Injection opening time related to inj. pressure
  • Initialization values over pressure control valve
  • Injection 1
  • Injection 2
  • Smoke limiter
  • Lambda reference
  • Lambda value of the smoke limitation
  • Lambda value of the smoke limitation 2
  • Speed limiter
  • Max allowed torque for speed ratio
  • Maximum indicated torque
  • Maximum indicated torque for monitoring
  • Protection for air load overheating
  • Protection for exhaust gas temperature before turbine
  • Protection for exhaust gas temperature before turbine 2
  • Protection for exhaust gas temperature before turbine 3
  • Protection for fuel overheating
  • Pressure control map over pressure regulating valve
  • Specific injection pressure limiter
  • Specific injection pressure limiter 2
  • Specific injection pressure limiter for EFT sensor
  • Relative permissible torque from the pedal position in torque limitation
  • Specific injection pressure
  • Specific injection pressure 2
  • Specific injection pressure 3
  • Specific pressure injection after starting
  • Driver torque request
  • Driver torque request AWD
  • Driver torque request for reverse gear
  • Torque limiter for selected gear
  • Torque limiter for selected gear 2
  • Torque limiter for for reverse gear
  • Setpoint maximum turbocharger speed
  • Torque limiter for the APS/BPS
  • Torque model - torque to fuel quantity conversion - particulate regeneration mode
  • Torque model - torque to fuel quantity conversion - particulate regeneration mode 2
  • Variable geometry duty cycle limit
  • Variable geometry duty cycle limit 2

固件标识 (27)

硬件号软件号 (chip)版本升级软件ECU
1.94.01303L906018BF 9979 BOSCH EDC17C46
1.94.01803L906018PB 2294 BOSCH EDC17C46
1.94.01503L906018BF 9978 BOSCH EDC17C46
1.94.02703L906018BG 8243 BOSCH EDC17C46
1.94.02403L906018BE 7851 BOSCH EDC17C46
1.00.02503L906018PR 2291 BOSCH EDC17C46
1.94.02003L906018PS 2292 BOSCH EDC17C46
1.00.01303L906018PS 9979 BOSCH EDC17C46
1.00.00703L906018PR 9978 BOSCH EDC17C46
1.00.01703L906018PS 9978 BOSCH EDC17C46
1.94.02603L906018BL 9477 BOSCH EDC17C46
1.00.01803L906018PR 9979 BOSCH EDC17C46
1.94.05303L906018BF 9948 BOSCH EDC17C46
1.94.03203L906018BG 8243 BOSCH EDC17C46
1.00.01503L906018PS 4008 BOSCH EDC17C46
1.94.01103L906018BF 9981 BOSCH EDC17C46
1.00.01803L906018PA 2472 BOSCH EDC17C46
1.00.01703L906018PA 9978 BOSCH EDC17C46
1.00.00903L906018PA 2288 BOSCH EDC17C46
1.94.02403L906018PR 2291 BOSCH EDC17C46
1.00.01303L906018PR 2480 BOSCH EDC17C46
1.00.00903L906018PA 9977 BOSCH EDC17C46
1.94.00603L906018BM 9478 BOSCH EDC17C46
1.94.02903L906018BF 7852 BOSCH EDC17C46
1.94.00303L906018QC 4017 BOSCH EDC17C46
1.00.01803L906018PS 2481 BOSCH EDC17C46
1.94.00903L906018BF 9980 BOSCH EDC17C46

ECU 说明

MICRO Infineon Tricore TC1767 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.