English English Español Español Italiano Italiano Nederlands Nederlands Deutsch Deutsch 中文 中文 Français Français Lietuvių Lietuvių

VOLKSWAGEN PASSAT 6 (B6) 1.9L 8V TDI 77kW/103HP EDC16U34

ECU BOSCH EDC16U31/U34/CP34 · 105 CV (77 kW) · 1900 cc · Diesel sovralimentato

ECU 数据库 › VOLKSWAGEN › VOLKSWAGEN PASSAT 6 (B6) 1.9L 8V TDI 77kW/103HP EDC16U34

查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 9 固件版本

获取该车辆的文件

购买文件（原始或改写）在 mastertuningfile.com 注册并订购文件

您是修理厂或调校师吗？

车辆数据

品牌VOLKSWAGEN
型号PASSAT 6 (B6)
发动机1.9L 8V TDI 77kW/103HP EDC16U34
原厂功率105 CV / 77 kW
排量1900 cc
燃料Diesel sovralimentato
车辆类型Auto

ECU

制造商BOSCH
型号EDC16U31/U34/CP34
存储 / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

可用的调校选项:

  • Smoke limiter 2
  • Main injection duration angle
  • Main injection duration angle 4
  • Boost pressure limiter
  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure
  • Boost pressure 2
  • Boost pressure in aftertreatment modes
  • Boost pressure in aftertreatment modes 2
  • Boost pressure in aftertreatment modes 3
  • EGR valve control
  • EGR valve control in aftertreatment modes
  • EGR valve control in aftertreatment modes 2
  • EGR valve control in aftertreatment modes 3
  • EGR valve control in aftertreatment modes 4
  • EGR valve control in aftertreatment modes 5
  • EGR valve control in aftertreatment modes 6
  • Exhaust gas temperature
  • Protection for engine overheating
  • Basic torque management at engine cranking
  • Engine idle vs. ECT sensor
  • Gearbox maximum torque allowed
  • Injection period
  • Injection period - correction
  • Maximum injection period
  • Max injection limit - limp mode
  • J
  • Injection in aftertreatment modes 1
  • Torque limiter
  • Smoke limiter
  • Lambda value of the smoke limitation
  • Lambda value of the smoke limitation in aftertreatment modes
  • Minimum LSU sensor temperature for O2
  • Maximum LSU sensor temperature for O2
  • LSU temperature threshold PID heater governor activation
  • Protection for air load overheating
  • Protection for exhaust gas temperature before turbine
  • Protection for fuel overheating
  • Protection for oil overheating
  • Air mass flow
  • Driver torque request
  • Driver torque request AWD
  • CAT downstream temperature sensor characterization
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Torque limiter for selected gear
  • Torque limiter for for reverse gear
  • Torque limiter for the APS/BPS
  • Torque limiter for the APS/BPS 2
  • Torque limiter in recovery mode
  • Torque limiter in recovery mode 2
  • Volumetric efficiency
  • Turbocharger volumetric efficiency
  • Variable geometry duty cycle limit

固件标识 (9)

硬件号软件号 (chip)版本升级软件ECU
—1037382088 1.67.02603G906021LR 9248 BOSCH EDC16U31/U34/CP34
—1037376706 1.67.01203G906021DP 7544 BOSCH EDC16U31/U34/CP34
—1037377575 1.67.01903G906021DP 7870 BOSCH EDC16U31/U34/CP34
—1037380420 1.67.02603G906021LR 8959 BOSCH EDC16U31/U34/CP34
—1037391593 1.67.02103G906056L 1846 BOSCH EDC16U31/U34/CP34
—1037397877 1.67.02203G997013C 3521 BOSCH EDC16U31/U34/CP34
—1037391587 1.67.01303G906021RS 1844 BOSCH EDC16U31/U34/CP34
—1037376110 1.67.02803G906021DP 7870 BOSCH EDC16U31/U34/CP34
—1037377575 1.67.02203G906021DP 7870 BOSCH EDC16U31/U34/CP34

ECU 说明

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial programming system NewGenius. To work on this ECU you can use NewTrasdata To modify this Ecu you can use the BDM system:555PRO or TRASDATA. WARNING:TRASDATA DO NOT need additional tools, 555PRO instead requires recalculation chks with VAG EDC16 CHECKSUM tool supplied with 555PRO, otherwise you will cause the block of the ecu or the detection of a change in the Ecu through diagnostic tool.
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial programming system NewGenius. To modify this Ecu you can use the BDM system:555PRO or TRASDATA. WARNING:TRASDATA DO NOT need additional tools, 555PRO instead requires recalculation chks with VAG EDC16 CHECKSUM tool supplied with 555PRO, otherwise you will cause the block of the ecu or the detection of a change in the Ecu through diagnostic tool.

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

Rapid FR Compact 2 - Modulo Aggiuntivo Dimsport Rapid FR Compact 2 - Modulo Aggiuntivo Dimsport € 215 Buy Rapid FR - Modulo Aggiuntivo Dimsport Rapid FR - Modulo Aggiuntivo Dimsport € 189 Buy

→ See all add-on modules on the shop

获取该车辆的文件

购买文件（原始或改写）在 mastertuningfile.com 注册并订购文件 您是修理厂或调校师吗？自己提供这些服务：激活您的 TuningFile 平台

读写此 ECU 的工具

Flex Programmatore per rimappatura centraline e cambi automatici Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 购买 The Genius The Genius OBD + Bench € 2.500 购买

其他 VOLKSWAGEN

GOLF 3 (A3)
2.8L VR6 128kW/172HP MOTRONIC GOLF 3 (A3)
2.0L 8V 85kW/114HP BOSCH GOLF 3 (A3)
2.0L 16V 110kW/148HP 5WP4 GOLF 3 (A3)
1.4L 8V 44kW/59HP MOTRONIC GOLF 3 (A3)
1.6L 8V 55kW/74HP MOTRONIC GOLF 3 (A3)
1.8L 8V 66kW/89HP MOTRONIC GOLF 3 (A3)
1.9L TDI 66kW/89HP DIL PASSAT 3 (B3)
1.6L 8V 54kW/72HP MOTRONIC PASSAT 3 (B3)
1.8L 8V 81kW/109HP MOTRONIC PASSAT 3 (B3)
1.9L TDI 66kW/89HP EDC 1.3.3

→ 所有 ECU VOLKSWAGEN