VOLKSWAGEN NIVUS/VIRTUS 1.0L L3 12V TSI 94kW/126HP MED17.1.27

ECU BOSCH MED17.1.27 · 128 CV (94 kW) · 1000 cc · Benzina sovralimentato

ECU 数据库VOLKSWAGEN › VOLKSWAGEN NIVUS/VIRTUS 1.0L L3 12V TSI 94kW/126HP MED17.1.27

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 11 固件版本

车辆数据

品牌VOLKSWAGEN
型号NIVUS/VIRTUS
发动机1.0L L3 12V TSI 94kW/126HP MED17.1.27
原厂功率128 CV / 94 kW
排量1000 cc
燃料Benzina sovralimentato
车辆类型Auto

ECU

制造商BOSCH
型号MED17.1.27
存储 / EPROMMICRO ST TRICORE - 32768 - 400000

可用的调校选项:

  • Maximum air charge for overboost protection with turbocharger fault
  • Base timing
  • Optimal spark timing/MBT
  • Boost pressure limiter
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • Factor for reducing maximum filling
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • Knock detection factor
  • Speed limiter
  • Maximum compression ratio
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Max torque profile
  • Optimal engine moment
  • Power limit torque table
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Throttle angle management

固件标识 (11)

硬件号软件号 (chip)版本升级软件ECU
1.94.01504C906025FT 2744 BOSCH MED17.1.27
1.94.00904C906025FR 2745 BOSCH MED17.1.27
1.94.00504C906025FQ 2746 BOSCH MED17.1.27
1.94.00504C906025EQ 2375 BOSCH MED17.1.27
1.94.00504C906025CR 2058 BOSCH MED17.1.27
1.94.00204C906025FG 3972 BOSCH MED17.1.27
1.94.00804C906025FS 2747 BOSCH MED17.1.27
1.94.00904C906025FR 3325 BOSCH MED17.1.27
1.94.00504C906025FG 3031 BOSCH MED17.1.27
1.94.01604C906025CT 2138 BOSCH MED17.1.27
1.94.00204C906025FT 3863 BOSCH MED17.1.27

ECU 说明

MICRO Infineon Tricore TC1793 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata