VOLKSWAGEN NEW BEETLE 2.5L 20V 110kW/148HP ME7.1.1

ECU BOSCH ME7.1.1 · 150 CV (11 kW) · 2500 cc · Benzina aspirato

ECU 数据库VOLKSWAGEN › VOLKSWAGEN NEW BEETLE 2.5L 20V 110kW/148HP ME7.1.1

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 11 固件版本

车辆数据

品牌VOLKSWAGEN
型号NEW BEETLE
发动机2.5L 20V 110kW/148HP ME7.1.1
原厂功率150 CV / 11 kW
排量2500 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商BOSCH
型号ME7.1.1
存储 / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

可用的调校选项:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Speed / RPM limiter
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Speed limiter
  • Speed limiter 2
  • Air mass flow

固件标识 (11)

硬件号软件号 (chip)版本升级软件ECU
02612011321037380932 1.84.01707K906032AA 9034 BOSCH ME7.1.1
02612011321037383542 1.84.01007K906032AA 9654 BOSCH ME7.1.1
02612011341037383571 1.84.01307K906032AC 9656 BOSCH ME7.1.1
02612011351037383572 1.84.00307K906032AD 9657 BOSCH ME7.1.1
02612013021037381953 1.42.00907K906032BA 9337 BOSCH ME7.1.1
02612018161037389780 1.84.00707K906032BQ 1354 BOSCH ME7.1.1
02612018181037389781 1.84.01007K906032BS 1355 BOSCH ME7.1.1
02612018191037392066 1.84.00407K906032BT 1867 BOSCH ME7.1.1
02612018191037392066 1.84.01007K906032BT 1867 BOSCH ME7.1.1
0261S045071037397651 1.84.00807K906032CK 3414 BOSCH ME7.1.1
0261S051991037501223 1.84.00607K906032CM 4585 BOSCH ME7.1.1

ECU 说明

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! On this epron can be set a KEY.