VOLKSWAGEN JETTA 5 (A5) 1.8L 16V TSI 118kW/158HP MED17.5.2

ECU BOSCH MED17.5 · 160 CV (118 kW) · 1800 cc · Benzina sovralimentato

ECU 数据库VOLKSWAGEN › VOLKSWAGEN JETTA 5 (A5) 1.8L 16V TSI 118kW/158HP MED17.5.2

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 2 固件版本

车辆数据

品牌VOLKSWAGEN
型号JETTA 5 (A5)
发动机1.8L 16V TSI 118kW/158HP MED17.5.2
原厂功率160 CV / 118 kW
排量1800 cc
燃料Benzina sovralimentato
车辆类型Auto

ECU

制造商BOSCH
型号MED17.5
存储 / EPROMMICRO ST TRICORE - 12032 Kbit - 178000

可用的调校选项:

  • Maximum air charge for overboost protection with turbocharger fault
  • Base timing
  • Optimal spark timing/MBT
  • Advance correction
  • Height correction for boost pressure
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Maximum pressure ratio limit for diagnosis
  • Exhaust gas temperature
  • Filling factor limit
  • Filling factor limit 2
  • Factor for reducing maximum filling
  • Gearbox maximum torque allowed
  • High pressure fuel pump setpoint
  • High fuel pressure pump limit for ECT sensor
  • High fuel pressure pump limit
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • Torque limiter at high EGT
  • RPM Limiter
  • Knock detection factor
  • Maximum boost pressure load
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Optimal engine moment
  • Power limit torque table
  • Relative permissible torque from the pedal position in torque limitation
  • Relative permissible torque from the pedal position in torque limitation - sport/race mode
  • Pressure ratio depending on IAT
  • Maximum pressure ratio limit depending on temperature
  • Driver torque request
  • Driver torque request AWD
  • Exhaust gas temperature sensor
  • Throttle angle management

固件标识 (2)

硬件号软件号 (chip)版本升级软件ECU
1.94.0181KD907115B 0020 BOSCH MED17.5
1.94.0131KD907115D 0020 BOSCH MED17.5

ECU 说明

MICRO Infineon Tricore TC1766 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop