查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 16 固件版本
车辆数据
| 品牌 | VOLKSWAGEN |
| 型号 | GOLF 7 (A7) |
| 发动机 | 1.6L L4 16V TDI 77kW/103HP EDC17C64 |
| 原厂功率 | 105 CV / 77 kW |
| 排量 | 1600 cc |
| 燃料 | Diesel sovralimentato |
| 车辆类型 | Auto |
ECU
| 制造商 | BOSCH |
| 型号 | EDC17C64 |
| 存储 / EPROM | MICRO ST TRICORE - 32768 Kbit - 400000 |
可用的调校选项:
- Boost pressure limiter
- Boost pressure limiter 2
- Boost pressure limiter 3
- Boost limiter correction for APS/BPS sensor
- Protection for cylinder head overheating
- Engine load - ceiling
- Maximum torque limitation at clutch
- Max accepted exhaust gas temperature value before turbine
- Max accepted exhaust gas temperature value before turbine 2
- Max accepted exhaust gas temperature value at particulate sensor
- Protection for engine overheating
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Engine idle vs. ECT sensor 2
- Engine idle vs. ECT sensor 3
- Engine idle vs. ECT sensor 4
- Engine idle vs. ECT sensor 5
- Injection period
- Injection period 2
- Injection period 3
- Injection period 4
- Injection period - correction
- Maximum injection period
- Injection opening time related to inj. pressure
- Injection 1
- J
- Injection 3
- Injection 4
- Injection 5
- Injection 6
- Boost pressure deviation limits for overboost detection
- Boost pressure deviation limits for overboost detection 2
- Boost pressure deviation limit for underboost detection
- Boost pressure deviation limit for underboost detection 2
- Torque limiter
- Smoke limiter
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 2
- Lambda value of the smoke limitation 3
- Lambda value of the smoke limitation 5
- Lambda value of the smoke limitation 6
- Speed limiter
- Maximum indicated torque
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for exhaust gas temperature before turbine 2
- Protection for exhaust gas temperature before turbine 3
- Protection for fuel overheating
- Protection for oil overheating
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure limiter 3
- Specific injection pressure limiter 4
- Specific injection pressure limiter for EFT sensor
- Specific injection pressure limiter for EOT sensor
- Relative permissible torque from the pedal position in torque limitation
- Maximum pressure ratio limit depending on temperature
- Specific injection pressure
- Specific air mass charge
- Specific air mass charge 2
- Specific air mass charge 3
- Specific air mass charge 4
- Specific air mass charge 5
- Specific air mass charge - correction
- Specific air mass charge - correction 2
- Driver torque request
- Driver torque request AWD
- Driver torque request for reverse gear
- Torque limiter for selected gear
- Setpoint maximum turbocharger speed
- Overboost timing
- Overboost timing 2
- Overboost timing 3
- Overboost timing 4
- Turbocharger volumetric efficiency
固件标识 (16)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| — | — |
1.94.009 | 04L906021N 9213 |
BOSCH EDC17C64 |
| — | — |
1.94.012 | 04L906021M 4792 |
BOSCH EDC17C64 |
| — | — |
1.94.005 | 04L997021 1646 |
BOSCH EDC17C64 |
| — | — |
1.94.018 | 04L906021M 5517 |
BOSCH EDC17C64 |
| — | — |
1.94.005 | 04L906021N 8138 |
BOSCH EDC17C64 |
| — | — |
1.94.020 | 04L906021M 4944 |
BOSCH EDC17C64 |
| — | — |
1.94.015 | 04L906021N 7636 |
BOSCH EDC17C64 |
| — | — |
1.94.015 | 04L906021N 4946 |
BOSCH EDC17C64 |
| — | — |
1.94.015 | 04L906021P 4955 |
BOSCH EDC17C64 |
| — | — |
1.94.004 | 04L906021P 9212 |
BOSCH EDC17C64 |
| — | — |
1.94.017 | 04L906021P 5519 |
BOSCH EDC17C64 |
| — | — |
1.94.018 | 04L906021P 6548 |
BOSCH EDC17C64 |
| — | — |
1.94.022 | 04L906021N 5518 |
BOSCH EDC17C64 |
| — | — |
1.94.009 | 04L906021P 8137 |
BOSCH EDC17C64 |
| — | — |
1.94.006 | 04L906021M 7635 |
BOSCH EDC17C64 |
| — | — |
1.94.013 | 04L906021N 4793 |
BOSCH EDC17C64 |
ECU 说明
MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
