查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 12 固件版本
车辆数据
| 品牌 | VOLKSWAGEN |
| 型号 | CRAFTER Mk1 |
| 发动机 | 2.5L TDI 80kW/108HP EDC16U31/CP34 |
| 原厂功率 | 109 CV / 8 kW |
| 排量 | 2500 cc |
| 燃料 | Diesel sovralimentato |
| 车辆类型 | LCV |
ECU
可用的调校选项:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Boost pressure in aftertreatment modes
- Boost pressure in aftertreatment modes 2
- Boost pressure in aftertreatment modes 3
- EGR valve control
- EGR valve control 2
- EGR valve control 3
- EGR valve control 4
- EGR valve control 5
- EGR valve control in aftertreatment modes
- EGR valve control in aftertreatment modes 4
- EGR valve control in aftertreatment modes 6
- Exhaust gas temperature
- Exhaust gas temperature 2
- Protection for engine overheating
- Basic torque management at engine cranking
- Basic torque management at engine cranking 2
- Engine idle vs. ECT sensor
- Injection period
- Injection period 3
- Injection period - correction
- Maximum injection period
- Injection opening time related to inj. pressure
- Injection 1
- Injection in aftertreatment modes 1
- Injection 2
- Torque limiter 2
- Torque limiter
- Smoke limiter
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation in aftertreatment modes
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature for O2
- LSU temperature threshold PID heater governor activation
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for exhaust gas temperature before turbine 2
- Protection for fuel overheating
- Protection for oil overheating
- Air mass flow
- Driver torque request
- Driver torque request AWD
- CAT downstream temperature sensor characterization
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for selected gear
- Torque limiter for for reverse gear
- Torque limiter for the APS/BPS
- Torque limiter for the APS/BPS 2
- Torque limiter in recovery mode
- Torque limiter in recovery mode 3
- Volumetric efficiency
- Volumetric efficiency - correction
- Turbocharger volumetric efficiency
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
- Variable geometry duty cycle limit 3
固件标识 (12)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| — | 1037383309 |
1.67.028 | 074906032AF 9612 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037391550 |
1.67.016 | 074906032AN 1829 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037383306 |
1.67.031 | 074906032AG 9613 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037503934 |
1.67.018 | 074906032BB 5177 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037386336 |
1.67.033 | 074906032BA 0647 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037386342 |
1.67.028 | 074906032AN 0641 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037503936 |
1.67.032 | 074906032AT 5175 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037503923 |
1.67.022 | 074997032E 5189 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037381015 |
1.67.014 | 074906032 9170 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037396064 |
1.67.011 | 074997032J 3420 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037391555 |
1.67.033 | 074906032AT 1833 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037386337 |
1.67.032 | 074906032AT 0646 |
BOSCH EDC16U31/U34/CP34 |
ECU 说明
Original EPROM Am29BDD160G PQFP 80 Pin - Microprocessor Motorola MPC56x. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
可用附加模块
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
