VOLKSWAGEN CRAFTER Mk1 2.5L TDI 120kW/161HP EDC16U31

ECU BOSCH EDC16U31/U34/CP34 · 163 CV (12 kW) · 2500 cc · Diesel sovralimentato

ECU 数据库VOLKSWAGEN › VOLKSWAGEN CRAFTER Mk1 2.5L TDI 120kW/161HP EDC16U31

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 8 固件版本

车辆数据

品牌VOLKSWAGEN
型号CRAFTER Mk1
发动机2.5L TDI 120kW/161HP EDC16U31
原厂功率163 CV / 12 kW
排量2500 cc
燃料Diesel sovralimentato
车辆类型LCV

ECU

制造商BOSCH
型号EDC16U31/U34/CP34
存储 / EPROMAm29BDD160G PQFP80 - Flash 3_V 512 x 32

可用的调校选项:

  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure
  • Boost pressure in aftertreatment modes
  • Boost pressure in aftertreatment modes 2
  • Boost pressure in aftertreatment modes 3
  • EGR valve control
  • EGR valve control 2
  • EGR valve control 3
  • EGR valve control 4
  • EGR valve control 5
  • EGR valve control in aftertreatment modes
  • EGR valve control in aftertreatment modes 4
  • EGR valve control in aftertreatment modes 6
  • Exhaust gas temperature
  • Exhaust gas temperature 2
  • Protection for engine overheating
  • Basic torque management at engine cranking
  • Basic torque management at engine cranking 2
  • Engine idle vs. ECT sensor
  • Injection period
  • Injection period 3
  • Injection period - correction
  • Maximum injection period
  • Injection opening time related to inj. pressure
  • Injection 1
  • Injection in aftertreatment modes 1
  • Injection 2
  • L
  • Torque limiter
  • Smoke limiter
  • Lambda value of the smoke limitation
  • Lambda value of the smoke limitation in aftertreatment modes
  • Minimum LSU sensor temperature for O2
  • Maximum LSU sensor temperature for O2
  • LSU temperature threshold PID heater governor activation
  • Protection for air load overheating
  • Protection for exhaust gas temperature before turbine
  • Protection for fuel overheating
  • Protection for oil overheating
  • Air mass flow
  • Driver torque request
  • Driver torque request AWD
  • CAT downstream temperature sensor characterization
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Torque limiter for selected gear
  • Torque limiter for for reverse gear
  • Torque limiter for the APS/BPS
  • Torque limiter for the APS/BPS 2
  • Torque limiter in recovery mode
  • Torque limiter in recovery mode 3
  • Volumetric efficiency
  • Volumetric efficiency - correction
  • Turbocharger volumetric efficiency
  • Variable geometry duty cycle limit
  • Variable geometry duty cycle limit 2
  • Variable geometry duty cycle limit 3

固件标识 (8)

硬件号软件号 (chip)版本升级软件ECU
1037383308 1.67.027074906032AH 9614 BOSCH EDC16U31/U34/CP34
1037383291 1.67.023074906032AD 9610 BOSCH EDC16U31/U34/CP34
1037390985 1.67.010074997032G 1683 BOSCH EDC16U31/U34/CP34
1037503934 1.67.028074906032BB 5177 BOSCH EDC16U31/U34/CP34
1037503921 1.67.029074997032C 5187 BOSCH EDC16U31/U34/CP34
1037381809 1.67.026074906032AH 9317 BOSCH EDC16U31/U34/CP34
1037381010 1.67.035074906032E 9175 BOSCH EDC16U31/U34/CP34
1037382680 1.67.017074906032T 9507 BOSCH EDC16U31/U34/CP34

ECU 说明

Original EPROM Am29BDD160G PQFP 80 Pin - Microprocessor Motorola MPC56x. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):