VOLKSWAGEN BORA A5 2.5L 20V 125kW/168HP ME7.1.1

ECU BOSCH ME7.1.1 · 170 CV (125 kW) · 2500 cc · Benzina aspirato

ECU 数据库VOLKSWAGEN › VOLKSWAGEN BORA A5 2.5L 20V 125kW/168HP ME7.1.1

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 27 固件版本

车辆数据

品牌VOLKSWAGEN
型号BORA A5
发动机2.5L 20V 125kW/168HP ME7.1.1
原厂功率170 CV / 125 kW
排量2500 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商BOSCH
型号ME7.1.1
存储 / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

可用的调校选项:

  • Base timing
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • Injection at part load
  • Speed / RPM limiter
  • Lambda enrichment for components protection
  • RPM Limiter 2
  • RPM limiter 3
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Optimal engine moment
  • Driver torque request
  • Throttle angle management

固件标识 (27)

硬件号软件号 (chip)版本升级软件ECU
02612011271037383585 1.84.00807K906032Q 9650 BOSCH ME7.1.1
02612011331037383547 1.84.00407K906032AB 9655 BOSCH ME7.1.1
02612012881037384217 1.42.00307K906032AQ 9685 BOSCH ME7.1.1
02612012901037378537 1.42.00707K906032AN 6738 BOSCH ME7.1.1
02612012911037379579 1.42.00807K906032AR 6747 BOSCH ME7.1.1
02612015021037381617 1.42.00807K906032BF 0601 BOSCH ME7.1.1
02612015031037382156 1.42.00407K906032BE 0601 BOSCH ME7.1.1
02612015041037383980 1.42.00607K906032BF 0603 BOSCH ME7.1.1
02612015041037383980 1.42.01107K906032BC 0603 BOSCH ME7.1.1
02612016781037390702 1.84.01307K906032BL 0711 BOSCH ME7.1.1
02612016791037390701 1.84.01607K906032BM 0711 BOSCH ME7.1.1
02612017391037396718 1.84.01307K906032BH 3071 BOSCH ME7.1.1
02612017401037394306 1.84.00407K906032BJ 2437 BOSCH ME7.1.1
02612017421037396717 1.84.00307K906032BG 3070 BOSCH ME7.1.1
02612017421037390447 1.84.01007K906032BG 1565 BOSCH ME7.1.1
02612085411037374812 1.42.00406A906032QC 6605 BOSCH ME7.1.1
02612085531037376025 1.42.01306A906032QE 6656 BOSCH ME7.1.1
02612085531037374002 1.42.01106A906032QE 6570 BOSCH ME7.1.1
02612085531037374813 1.42.01006A906032QE 6607 BOSCH ME7.1.1
02612085541037376024 1.42.01006A906032QF 6657 BOSCH ME7.1.1
02612085541037374816 1.42.00806A906032QF 6608 BOSCH ME7.1.1
02612085541037382588 1.42.01206A906032QF 9425 BOSCH ME7.1.1
02612088571037384443 1.42.00407K906032H 0611 BOSCH ME7.1.1
02612088571037374829 1.42.00807K906032H 0403 BOSCH ME7.1.1
02612088581037384440 1.42.00507K906032J 0611 BOSCH ME7.1.1
02612088581037374828 1.42.01007K906032J 0403 BOSCH ME7.1.1
02612089891037376251 1.42.00707K906032M 6697 BOSCH ME7.1.1

ECU 说明

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! On this epron can be set a KEY.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! On this epron can be set a KEY. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata